[CloudEdge]ANRAN P2 P3 HD WIFI SECURITY CAMERA Quick Start Guide

What’s Included

image 5

Product Overview

image 6

CAUTION: Please insert the Micro SD Card according to the direction shown in thediagram. Micro SD Card might JAM if inserted incorrectly and device could bedamaged.

SD Card Port: Support micro SD card for local storage (Max 128GB).

Reset button: Used to restore the camera to factory settings (Press and hold on5-8s).

Card capacity requirements:8-128GB.

Read and write speed requirements: class10 level.

File format: FAT32.

CloudEdge App installation and Setup

Search ” CloudEdge” on apple store or google play to download the app.

Mounting the camera

Select Height and location

Hang the camera 7-10 ft (2-3 m) above the ground. This height maximizes thedetection range of the motion sensor of the camera, Avoid placing the cameraunder direct sunlight.

image 7

Installation

  1. Drilling according to position sticker, drill bit: 15/64″(6 mm)
  2. Insert the plugs.
  3. Tighten the screw.

What is required:

image 8
image 9

Test the Wifi signal at installation position

Use cell phone to test Wifi signal quality at the installation position beforeinstalling camera, make sure the Wifi router can provide good Wifi signal.

image 10

Register an account

The CloudEdge app that is necessary to operate the camera.Signing up for storage in the cloud is totally optional and is really not necessarywhen using an onboard Micro SD card.

  1. Open the APP to sign up an account. Go to the login interface, and click “SignUp”.
  2. Sign up with your email address, and click “Next.
  3. Set up an “Nickname” and “Password” for your APP, click “Done” to complete.
image 11

Set up WiFi for the camera

1.Bring both your mobile phone and your camera close to your router(max distance of 5 meters/16 feet).

Note: The camera can only connect to a 2.4 GHz WiFi signal. lt does notsupport using a 5 GHz signal. Therefore, please ensure you connect to a 2.4 GHzsignal on your network as shown in the below illustration.

image 12

2.Log in to “CloudEdge”, then tap the “+” icon in the center. Tap “Camera”to add device.

image 13
  1. Reset the device and wait for a flashing RED indicator light, then tap “Next”
  2. Selecting the Wi-Fi the device needs to connected with (your home Wi-Fi), input the password and click “Next”.
image 14
image 15

5 Use the camera to scan the QR code on your mobile phone as noted below.When the scan is complete you will hear a prompt tone then push Next.

image 16

6.When connecting, as stated earlier, you should make sure that the router,mobile phone and the camera and are as close together as possible(max 5 meters/16 feet). When a successful connection occurs a “click” will beheard and a checkmark will be noted as shown below. The camera willshow with a numerical name that can be changed to your likings such asDriveway Camera, Street View Camera or whatever.

image 17

FAQs

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top