1. Product details
| Camera Button | Operation |
| Power-Button | Press and hold the button for 5 seconds to turn the device on and off |
| Power-Button | Quick press 1 second to wake up the camera from standby mode. |
| Reset-Key | Press and hold for 5 seconds, it will reset and restart. |
| LED Status | Operation |
| Slow blinking Red | Awaiting Wi-Fi connection, start adding devices |
| Fast blinking Red | Připojení Wi-Fi |
| Solid on Red | Network is abnormal. |
| Solid na modré | Wi-Fi connected, camera running normally. |
2. Install camera
Please fix the bracket first, then install the camera.
1. If it is a wooden wall, you can use the nails provided by the product to fix the bracket and the wall.
2. If it is a cement wall or ceramic tile wall, please use the electric drill to drill the hole in the wall and then install the bracket, and install it with the expansion screw provided by the product.
3.Installation CocoCam APP
Search “CocoCam” in the APP Store or Google Play, or scan the QR code to download and install it on your phone.
NOTE: Please turn on the two permissions below when you use this APP for the first time.
1. Alow CocoCam to access mobile cellular data and wireless LAN, or it will fail to add a camera.
2. Allow CocoCam to receive pushed messages, or the phone will not receive an alarm push when motion detection or audible alarm is triggered.
3.1 Register account
New users need to register by e-mail, click”Register,” follow the steps to complete the registration of the account and log in.
3.2 Help and Feedback
For product issues or questions, please send an email to [email protected] (We recommend your e-mail address and product model number. We will reply to you within 24 hours by e-mail.)
4. Switch on camera
Press the power button for five seconds to turn the camera on. lf it does not power on,please plug in the DC5V 1A/2A power adapter and charge the camera for 15 minutes before trying again. The camera is on when the indicator light below the lens is flashing slowly.
5. Add Camera
Před použitím:
1) Please insert the Micro SD card before powering on; otherwise, the Micro SD card cannot be detected.
2) Bring the camera and your phone within 1 to 3 feet (30 to 100cm) of the router and connect to Wi-Fi.
3) Note: if your camera does not support the 5G band, please use a 2.4G band network.
6.Device menu
| 1. Add camera | 14. Full screen option | 27. Audible and visual alarm |
| 2. Camera time | 15. Speaker | 28. Full-color mode |
| 3. Real-time view | 16. Bit rate | 29. Photo album |
| 4. Multi-screen | 17. Cloud playback | 30. Video replay |
| 5. Camera name | 18. Preview | 31. Playback alarm records |
| 6. Open & hide view | 19. Local play | 32. Alarm date selection |
| 7. Replay | 20. Screenshot button | 33. Alarm points selection |
| 8. Settings menu | 21. Record | 34. Screenshots |
| 9. My device list | 22. White light switch | 35. Video record |
| 10. Messages | 23. Intercom option, long press to talk | 36. Download videos |
| 11. My profile | 24. Motion detection | 37. Delete the day’s videos |
| 12. Camera settings | 25. PTZ control | |
| 13. SD and HD options | 26. Alarm switch |
7. PIR Detection
Dosah detekce čidla PIR
PIR “Alarm Setting is on by default, and the Default sensitivity is “high,” but it is adjustable
Device”-” Settings”-“Alarm Setting.” The detection distance is 10 meters(32ft).
*NOTE: Higher sensitivity offers a longer detecting distance, but it would lead to more false alarms.
8. Alarm push notification and playback
The battery camera with a PIR sensor is not designed for 7×24 hours all day recording but seeks to push alarm message notifications to the APP and record video to the micro SD card or cloud server need to pay) when the PIR sensor detects human body motion events when you can playback the motion videos wherever you are via CocoCam APP.
When PIR is triggered, the camera and system will act.
1. Alarm sound in the APP(please open the permission for the notification of the CocoCamAPP in the mobile setting and turn off the mobile Volume).
2. Alarm Messages Notification (please activate the notification via CocoCam APP in the mobile setting).
3. Alarm snapshot and video recordings on micro SD card/cloud storage(please make sure the micro SD card is inserted). CocoCam APP notification in mobile.
9. Best conditions for night vision
When the camera is turned on in night vision mode, if there is an obstruction within three meters of the lens, infrared rays will have a concentrating effect, which will cause the obstruction part to be extremely bright, and other screens will be darker, and the night vision effect will be poor (No matter where the camera is installed, make sure there are no obstacles within 3 meters of the lens)
10. Important information for reducing false alarms
10.1 To reduce false alarms, please:
Do not install the camera in a place where the bright objects or light is directed, including sunshine, bright lamp lights, etc.
Please do not place the camera in the place where the vehicle and people often come and go.
Keep the camera away from outlets such as air conditioning vents. Humidifier, heat transfer openings of projectors, etc., remote.
Do not leave the camera facing the mirrors or glass.
Keep the camera at least 1 meter away from wireless devices to avoid wireless interference.
10.2 Cover of the surveillance area
When installing the camera, the PIR sensor should not be vertically aligned with the moving object, as it may not detect movement. lt is recommended that the camera be tilted more than 10 degrees to capture all motion.
11. Video playback and micro SD card
Video recording was stoned on a micro SD card(micro SD card is not included in the package) or cloud.
10.1 Only supports 2-128GB.
10.2 To ensure the recognition rate and micro SD card life, we recommend using Class10 Speed Micro SD Card, Samsung, SanDisk, and Kinston Micro SD Card.
10.3 It is recommended to check the micro SD card for damage before using it. Format the Micro SD card before inserting it into the camera. The format must beFAT32 or EXFAT32.
10.4 After you insert a micro SD card into the camera properly, the app “CocoCam” will show the memory volume. That means the camera micro SD card is readable.
10.5 If the micro SD card is not readable, you could contact us.
| Popis | Solution and operation |
| A Connection can not be established | 1)Check your Wi-Fi name and password. 2) Note: if your camera does not support the 5G band, please use a 2.4G band network. 3) Make sure your camera and mobile phone are near the router. 4) Email contact customer service staff to solve your problem within 24 hours |
| Reset to default | 1) Press and hold the reset button for 5 seconds 2)Hear a”bugu” sound. 3) The red light starts to flash slowly. |
| Why is someone crossing without an alarm? | 1) Press the reset button to the factory setting 2) Remove the camera in the CocoCam APP 3)Re-connection. |
| Alarm picture without persons | 1) The camera needs time to wake up, and people are moving too fast. 2) PIR may detect some objects with dissipative heat, and it is recommended to lower the sensitivity of the PIR alarm. |
| Frequent alarm | 1) Because the environment or the number of vehicles where you install the camera triggers the cameras frequently 2) Adjust the camera alarm sensitivity to “low.” |
| Why is someone crossing without alarm? | The PIR inspection area has a range limitation. It may be that the person passing the position is too far or too close, or the person passes quickly from a corner of the camera and is not successfully detected by the PIR. |
| Žádné stisknutí alarmu | Enable notification of the CocoCam APP in the mobile settings. |
| No alarm video recording | Please insert the micro SD card or turn on the cloud storage |
| Zařízení v režimu offline | Check if the network wors well. It is possible that the location where the camera is installed is too far from the router, causing the Wi-Fito not to cover the camera. |
| Video delay | Check the Wi-Fi network, the distance between the camera and the router should not be too long. |
| Short battery life | The camera was awakened too often and should not be placed on the roadside or in the sun. |
| CocoCam APP Flashback | 1)It may be that your phone system version is too low or too high, resulting in poor compatibility. It is recommended that you uninstall the APP and redownload it. 2)Contact customer service staff to provide information such as the model number and system version number of your mobile phone |
| Unable to register an account | 1)When registering an account, please select the correct country. 2) When you register your account, you do not need to enter a verification code. Please follow the process to register your account. |
| Unable to add a friend | Your account and friend account must choose the same country or the same area. For example, accounts in Europe and America cannot add friends. |