1. what’s in the box
Please consult the below list for all the components.
2. Product Drawing
1. Doorbell-mounting screw holes
2. Wall-mounting screw holes
3. Angle adjustment screw holes
4. Hardwire holes
3. Screws & Tools
ANCHORS: (You only need 2, we offered 3)
—-To install the angle mount on concrete, stucco, or brick.
MOUNTING SCREWS 1: (You only need 2, we offered 3)
—-To mount the bracket on the wall.
MOUNTING SCREWS 2: (You only need 2, we offered 3)
—-To mount your doorbell bracket on the angle mount.
STAR-SHAPED HEAD SCREWS: (You only need 2, we offered 3)
—-To fix the angle of the angle mount.
STAR-SHAPED SCREWDRIVER:
—-To drive the star-shaped head screws and freeze the angle mount.
4. Features
· Size: 54(W)× 140(H) × 30(D) mm
· Weight: 55 grams
· Material: ABS plastic
· Symmetric Design:
The angle mount is symmetrically designed. Flip over the angle mount by 180°, and you will be able to adjust the viewing angle for the doorbell, facing to the right or left.
· Degree Scale:
This angle mount allows you to adjust the angle to the left or right accurately from 20 degrees to 40 degrees. You can easily get your desired angle by viewing the exact degree scale and fixing the angle with provided screws and tools.
5. Installation
1. Separate the angle mount kit by pulling them apart gently, and install the rear plate first.
2. Position the rear plate and install it on your wall with screws. Please mind the wires if there are any.
3. (Optional) Flip over the angle mount by 180° if you want your doorbell facing to the other side.
4. Mount the front plate back to the fixed rear plate. Make sure the two hinges are properly attached.
5. Mount the doorbell bracket to the angle mount. (Optional: connect the wires if you are hardwiring your doorbell)
6. Mount your doorbell to the fixed bracket. Make sure the doorbell reaches the bottom, where you can hear a click.
7. Secure your doorbell with the provided star-shaped screw and screwdriver.
8. Adjust the angle for the doorbell and freeze the angle with the star-shaped screws and screwdriver on the top and bottom.
9. All set!
Congratulations!
