Déclaration de la FCC
Cet équipement a été testé et déclaré conforme aux limites d'un appareil numérique de classe B, conformément à la partie 15 des règles de la FCC.
Ces limites sont conçues pour fournir une protection raisonnable contre les interférences nuisibles dans une installation résidentielle. Cet équipement génère, utilise et peut émettre des fréquences radio et, s'il n'est pas installé et utilisé conformément aux instructions, peut causer des interférences nuisibles aux communications radio. Cependant, il n'y a aucune garantie que des interférences ne se produiront pas dans une installation particulière. Si cet équipement provoque des interférences nuisibles à la réception de la radio ou de la télévision, ce qui peut être déterminé en éteignant et en allumant l'équipement, l'utilisateur est encouragé à essayer de corriger les interférences en prenant une ou plusieurs des mesures suivantes :
-Réorienter ou déplacer l'antenne de réception.
-Augmenter la distance entre l'équipement et le récepteur.
-Brancher l'appareil sur une prise de courant située sur un circuit différent de celui sur lequel le récepteur est branché.
-Consulter le revendeur ou un technicien radio/TV expérimenté pour obtenir de l'aide
Le non-respect de ces règles peut entraîner l'annulation de l'autorisation accordée à l'utilisateur d'utiliser cet équipement. (Exemple : utiliser uniquement des câbles d'interface blindés lors de la connexion à l'ordinateur ou aux périphériques). Tout changement ou modification non expressément approuvé par la partie responsable de la conformité peut annuler le droit de l'utilisateur à faire fonctionner l'équipement. Cet équipement est conforme à la partie 15 des règles de la FCC. Son utilisation est soumise aux deux conditions suivantes :
1) Cet appareil ne doit pas provoquer d'interférences nuisibles
2) Cet appareil doit accepter toute interférence reçue, y compris les interférences susceptibles de provoquer un fonctionnement indésirable.
Déclaration d'exposition aux radiations de la FCC : L'équipement est conforme aux limites d'exposition aux radiations fixées par la FCC pour un environnement non contrôlé. Cet équipement doit être installé et utilisé avec une distance minimale de 20 cm entre le radiateur et votre corps.
FCC ID: 2AG7C-BABYIT(Camera)
FCC ID: 2AG7C-BABYIM(Monitor)
01/what’s in the Box
02/Overview
03/Download ‘ieGeek Cam’ APP
Method 1:
Download the ‘ieGeek Cam’ APP from the APP Store (iOS) or Google Play(Android)
Method 2:
Scan the QR-Code to download the App
04/connect the Camera to the APP
The camera can be connected to both the monitor and the app. Generally, it is connected to the monitor by default.
Follow the steps below to connect the camera to the App:
- 1. Make sure the Wi-Fi network is a 2.4 GHz network. as the camera doesn’t support 5GHz Wi-Fi.
- 2. Download the ieGeek cam App on your phone. Register a new account to log in or log in directly.
- 3. Use the needle to reset the camera for 5 seconds until you hear the ‘BOOGU’ beep, which means the camera has been reset; after 10-20 seconds, you will hear another beep, and the red light of the camera blinks slowly.
- 4. Follow the step instructions on your smartphone to add the camera, and scan the QR code with your camera.
Note: You can share the app with other people; the shared account and your account must belong to the same country.
05/connect the Camera to the Monitor
Turn on the power of the camera and the monitor, and then the camera will automatically connect to the monitor.
Note: If the connection to each other is not successful the first time, please use the needle to reset the camera and reconnect the monitor after the second beep of the camera. The connection is distance-limited, so make sure the distance between the camera and the monitor is no more than 300m.
06/Disconnect the camera from the monitor
- 1. Press the Menu button on the display screen, and select setting > Camera.
- 2. Long press the ok button on the display screen to release the binding.
07/Reconnect the camera to the monitor
1. Press the Menu button on the display screen, and select setting> Camera.
2. Long press the camera Pairing button until you hear the prompt tone
3. Press the ok button on the display screen to start pairing.
Note: If you have problems with connection, please feel free to contact [email protected] for on one customer service guidance.
Connect two cameras to the monitor.
Follow the step above to connect the two cameras in turn. Two screens will appear on the monitor.
Press the back key for camera selection(a small camera icon flashes on the screen).
Press ←or→ for camera selection, then press the ok key to remotely control the selected camera (split view).
Press the ok key again to enter the selected camera in full-screen mode.
Press the back key to reselect the camera.
08/General Settings
Set up volume
1. Press Menu button on the display screen, and select and press ok to enter the interface
2. Press the UP and DoWN direction buttons to adjust the volume.
Set up brightness
1. Press the Menu button on the display screen, select, and press ok to enter the interface.
2. Press the UP and DOWN direction buttons to adjust brightness.
Set up time
1. Press the Menu button on the display screen and select Date and Time.
2. Press the Direction buttons to change the date, time, and time displaying mode.
Set up language
1. Press the Menu button on the display screen and select Language
2. Select the language you need
Set up sleep mode.
You can set up sleep mode to increase standby time.
1. Press the Menu button on the display screen and select Sleep mode.
2. Select Sleep mode as 1 minute, 5 minutes, 10 minutes, 30 minutes, 60 minutes, or off.
Setting camera status indicator
1. Press the Menu button on the display screen, select and press the ok button to enter the interface
2. Press the left and right arrow keys to select on or off.
SD card
1. Press the Menu button on the display screen, and select > SD card management. Then, you can view the total capacity and remaining capacity of your SD card.
2. (Optional) You can format the SD card as you need, but make sure that the important data is backed up.
Remarque :
This product does not support hot-swapping.
Please insert the SD card before powering it or unplug it after power off.
Upgrade
Make sure your camera is connected to a 2.4 GHz Wi-Fi. You can upgrade your camera when the upgraded alarm appears. Or press the Menu button on the display screen and select Device information to check whether it needs to be upgraded.
Low battery alarm
When the camera is low on battery, the low battery alarm will appear on the display screen. Please change the display as soon as possible.
Motion Tracking & Alarm Area
1. Motion Tracking: Open the ieGeek cam app, click your device, click the pinion icon in the upper right corner, select Motion Tracking, and open it.
2. Alarm Area: Open the ieGeek cam app, click your device, click the pinion icon in the upper right corner, and select Alarm Management>Motion Detection>Alarm Area.
Onvif Settings
Open the ieGeek cam app, click your device, click the pinion icon in the upper right corner, and select Onvif Setting; you need to set a password to enable this function.
09/FAQ
Q: The monitor cannot be previewed properly?
A:
Check whether the monitor has been connected to the camera. If not, pair the camera and the monitor first.
Q: Cannot find the pairing button?
A:
The pairing button is the call button of the camera. Long press the button for 3 seconds, and follow the step instructions of the display. (To enter the pairing interface of the display, press the Menu button on the display screen and select Camera Management.)
Q: What if the monitor screen is stuck and it doesn’t work while pressing any buttons?
A:
Reset your monitor with the needle, and then long-press your monitor’s power button to restart it.
Q: Why can’t I get the notifications with my cell phone App when I connect the camera to the monitor?
A:
Please confirm that the App has been running on the phone and the relevant reminder function has been opened; Message notification and authority confirmation in the mobile phone system have been opened.
Q: How can I add devices or configure my network?
A:
The camera can be connected to both the monitor and the application. Generally, it connects to the monitor by default.
Q: The sound and cry detection function doesn’t work.
A:
The sound detection interval is 1 minute; after the sound triggers the alarm, the interval is 1 minute again to avoid fent alarms. The cry detection function can detect most babies crying. This function uses a sound filtering algorithm, so some crying may not trigger the ‘cry detection’ function.
Please follow the steps below to connect the camera to the application.
- 1. Make sure the Wi-Fi network is a 2.4GHz network, as the camera does not support 5GHz Wi-Fi.
- 2. Download the appropriate application on your phone. Register a new account to sign in or sign in directly.
- 3. Use the needle to reset the camera until the red status light flashes slowly (you must connect the camera to the app within 2 minutes, or you must reboot the camera again).
- 4. Follow the step-by-step instructions on your smartphone to add the screen and scan the QR code with the camera.
Q: Can I set up motion tracking and alarm zones on the monitor?
A:
No, you need to set the motion tracking and alarm area through the ieGeek Cam APP.
Q: Why does the display make a bee sound?
A:
Because the monitor is too close to the camera, take it away from the camera more than 1 meter.
If you encounter any other problems, please send your order number and problem to [email protected], we will deal with your issue within 24hours.