FUNOTION SMART WIFI HD CAMERA DomeCam Quick Start Guide

Packing list

Product structure -Front

The red light is normally on:The camera or the internet has problem

The red light flickers:Wait for wifi connection (flicker slowly)

Connected WiFi (flicker quickly)

The green light flickers:The camera is connecting to network
The green light is normally on:The camera is on line and the user can view the video.

Product structure -Back

RESET: Press “Reset” for about 3-5s to restore the factory default.

TF card slot : Support TF card local storage(Maximum support 128G) , please format the TF card in the”CloudEdge” APP for the first time using.

Download the App

Scan the below QR code or search the “CloudEdge” in the APPstore or google play , then download and install the APP

(1) Sign Up : Select your country to register an account with your email.

(2) Log in : Select your country,enter the existing account and password to log in.

Add the camera

Make sure the wifi for phone connection is 2.4G and in the good network condition (5GHz not supported ) ,wait for the device red indicator flickers slowly (if the device red indicator doesn’t flickers slowly,long press the ” reset for 3-5s until the device send out “BUGU” sound ,wait for the device to restart then add the camera)Open the “CloudEdge” APP , click +” icon in the upper right corner to add the camera,select “Power Plug Camera”,then enter to the camera list screen. Follow the app prompt click”Next”, enter wi-fi password which mobile phone connected then click “Next”then put the QR code face to the camera about10 to 15 cm, waiting for the camera emits “BUGU ” sound ,then click “Next”,then the APP will search the device automatically

Function introduction

1.Time ofthe device
2.Sound ofthe device
3.Live
4.Screenshot
5.Intercom
6.Motion Detection
7.Camera Settings
8.Full screen preview
9.Definition of the picture
10.Cloud
11.History
12.Record
13.PTZ Methoo
14.Lens switch

FAQ

Failed to add during network configuration?

Please make sure your phone is connected to a router in the 2.4GHz band,and make sure that the Wi-Fi password iscorrect.

After scan adding is still unsuccessful?

Restart the device or power off the device after scan adding is still unsuccessful, and then try to add it again.

The device cannot preview normally?

Please check if the network signal is too weak, please put the camera close to the router, if still cannot preview, reset the camera and add it again.

After resetting the device, why is the camera still in the device list?

Resetting the device only to reset the camera’s network confiquration,but cannot change the configuration on the APP, to delete the camera, you must log in the APP to delete.

How to switch the camera network to another router?

First remove and reset the device on the APP, and then configure the network for the device again through the APP

Why does the device can not recognize the TF card?

Please insert and remove the TF card after power off, please check if the TF card is working normally and whether it is in FAT32 format, when the mobile phone or the device is working in unstable network, the APP also will prompt that the TF card cannot be recognized.

Safety Statement

Precautions

The applicable working temperature of this product is -20 C ~50 C, please do not use it in an environment where the temperature is too high or too low.

Please do not place the lens close or facing the glass, white walls, or lighting objectsin order to avoid the picture being too bright, dark, or white.

Please make sure that the camera is installed within the good Wi-Fi signal range, andplaced it as near as possible to the router and try to install it far away from metal and microwave ovens that may affect the signal.

After-Sale Service and Technical Support

For after-sales service, please contact [email protected]. Describe the camera issue, and inform us of the order number, camera model, and Serial Number on the camera sticker, we will reply to you as soon as possible.

Legal notice

Symbols:Direct current(DC)

Don’t throw batteries or out of order products with the household waste(garbage). The dangerous substances that they are likely to include may harm health or the environment. Make your retailer take back these products or use the selective collect of garbage proposed by your city.

Hereby， Funovation declares the radio equipment type DomeCam is in compliance with the Directive 2014/53/EU. The full test of the EU declaration of conformity is available at the Internet address :www.funovation.store.

FCC

FCC Statement

This equipment has been tested and found to comply with the limits for a Class B diqital device,pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions.may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. lf this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to which the receiver is connected

Consult the dealer or an experienced radio/TV technician for help.

FCC Radiation Exposure Statement

This device complies with FCC radiation exposure limits set forth for an uncontrolled environment and it also complies with Part 15 of the FCC RF Rules. This equipment must be installed and operated in accordance with provided instructions and the antenna(s) used for this transmitter must be installed to provide a separation distance of at east 20 cm from all persons and must notbe co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provide with antenna installation instructions and consider removing theno-collocation statement.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following twoconditions:

(1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Caution!

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.