ieGeek ZS-GX1S 1080P Battery Dome Camera User Manual

image 460

Note:

The camera only supports 2.4GHz Wi-Fi and does not support 5GHz WIFl.

Before connecting this camera to tWi-Fii-Fi, please ensure the Wi-Fi signal strength is over 85%. If the camera is far away from the signal source, it won’t be connected successfully for the first time.

If your router is connected to too many devices, the camera will fail to connect to Wi-Fi because of the IP address conflict.

To safeguard your privacy, this camera supports CloudEdge control. It does not support PC Browser and other Software.

This wireless camera supports event recording when Wi-Fi is connected.

Video playback works in the CloudEdge APP only. It does not support the 3rd party player.

Manually snapshot and recording files are saved on mobile. Events snapshot files are saved in the Cloud. Events recording files are saved on a Micro SD card.

It will speed up the battery power consumption if you always watch live footage or recorded videos from the SD card. Please charge the camera time based on the low-power reminder. (Before using the camera for the first time, please fully charge the camera with the power cord in the package).

2. Product Introduction

image 461
Power KeyPress and hold the power button for 5 seconds to turn on the camera.
Reset KeyPress and hold RESET for 5 seconds to reset the device(if you have modified the settings, they will revert to the factory default settings)
SD Card SlotSupport local SD card storage (up to 128G)
LensSupport FHD 1080P resolution
Power LightRed means charging is in progress
Blue means charging is complete
MicrophoneCapture a sound for your videos
PIR SensorCan detect moving objects up to 12 meters away
Working Status LightRed light continuously on : camera network abnormal
Red light flashing slowly: waiting for Wi-Fi connection
Red light flashing fast: Wi-Fi connection in progress
Blue light continuously on : the camera is running normally
SpeakerTwo-way voice call sound output
USB Charge PortUse a 5V/2A power supply to charge the camera
Thumb ScrewFor fixing the camera and the bottom bracket

3. APP Installation and Account Registration

4.1 Download’CloudEdge’ APP

Method 1: Download ‘CloudEdge’ APP from APP Store (iOS) or Google Play(Android);

Method 2: use the ‘CloudEdge’ APP QR code to download it.

image 417

Tips: Please turn on the two permissions below while using this app for the first time.

1. Allow the ‘CloudEdge’ APP to access mobile cellular data and wireless LAN, or it will fail to add an IP camera.

2. Allow the ‘CloudEdge’ APP to receive a pushed message, or the phone will not receive an alarm push when motion detection or audible alarm is triggered.

image 418

4.2 Register Account

New users need to register by email. The concrete steps are as following:

  • 1) Click “Register;
  • 2) Follow the steps to complete the registration of the account;
  • 3) Log in.

Note:

  • When registering a new account, please choose the region in which you are actually in. (Different registered regions can’t share the camera.)
  • Please choose to register by e-mail

4. How to Add Camera to APP

4.1 Install Micro SD card

Please insert a Micro SD card to record videos and playback when motion is detected. (Micro SD card is not included; the camera supports up to 128GB Micro SD card)

image 462

Note: Please insert the Micro SD card before powering it on; otherwise, the SD card can not be detected.

4.2 Power on camera

Press and hold on the power button for 5s to turn on the camera(If it can’t be powered on, please plug in a DC 5V 2A power adapter to charge the camera for 15 min first).

The indicator with a red light blinking slowly means the camera is started successfully.

If the indicator is not in red light blinking slow condition, please reset this camera.

1705501678202

Note: DC 5V 2A power adapter is not included in the packing list.

Cannot turn on my camera?

1705501700598

Charge the camera, and then try to turn on it.

Press and hold the power key until turning on the camera. (can try many times)

If you tried the above steps but still had no luck, please message your order and problem to [email protected].

4.3 Connect the camera

ff7e5917 c92b 470d a30e d5fcd1914529

Note: Put the camera and smartphone 1 to 3 feet (30 to 100 cm)away from the router to set Wi-Fi.

Note: The camera only supports 2.4GHz WilFl; it doesn’t support 5GHz WIFI.

4.4 Wi-Fi Connection Steps:

A. Turn on the camera;

image 463

B.Press and hold the reset button for 5 seconds; reset or restore the factory until you hear the sound of”Boogu”(means resetting successfully)

C.Run CloudEdge App, click “+” at the top right, and select “Battery Camera.” According to the guide on the APP, please ensure the camera is activated. (The LED indicator light is turning red and flickering slowly);

D. Choose 2.4GHz Wi-Fi SSID and enter the password, and then click the“next step.”

E.Click the“OK” to make sure the Wi-Fi information;

F. After entering the following operation interface, please click “Next,” and you will see the “Scan QR Code” interface.

G. Put the QR code in front of the camera lens about 10-15cm. The device lens is aimed at the QR code on the phone screen with a distance of 10-15cm. After the device recognizes the QR code, the camera will make the sound ‘Boogu.’ After you hear it, please click ‘next.’

H. Then, the camera will start connecting to Wi-Fi. After the connection is finished, it will skip to the ‘Device Found’ page; you can edit the camera name, click ‘Done, ‘and then go to your device list and start viewing videos.

My camera fails to connect to Wi-Fi.

1) Please make sure the Wi-Fi connection to the camera is 2.4GHz. In our experience, the connection fails in most cases, which is caused by users using 5GHz WIFI.

2) Make sure the password correction of the Wi-Fi. Note: the password of the WiFicannot includes a single quote, underline, space, and virgule (/).

3) Check the number of devices your router connected. In general, the router has connection limits. Once the devices that the router connected exceed its max limit numbers, other devices will not be connected to the router.

4) Make sure the QR code on the phone screen is normal, and the distance between the phone and the camera lens is 10-15cm (3.9- 5.9 inches) during the scanning process.

5) After checking the above information, if the camera cannot connect to the Wi-Fi. Please try to re-download the APP, reset the camera, restart the router, and then add the camera again.

6) if you tried all the steps but still have no luck, please message your order and problem to
[email protected].

5. Camera Installation

How to install with wall mount?

A. Select the installation location;

B. Take the camera and your phone to the installation location;

C. Use the Installation Guide in the App to diagnose the signal strength of your Wi-Finetwork. (It is suggested that you install the camera in a place that has a strong Wi-Fi signal so that this camera can work well for you.

D. Use a power drill and four screws to fix the metal bracket on the wall. It is suggested that this camera be installed at 2.4-3m from the ground.

E. Clip the camera into the metal bracket and use the four screws to fix the camera.

image 464

Tips:

Please make sure the wall or surface where you want to install the camera is flat. For easier installation, it is suggested to use a drill. Concrete walls may not be suitable for the installation.

Please do not install the camera in a position that nears the heat source, such as the air conditioning outdoor unit and Kitchen smoke outlet.

Try to avoid installing the product on the side of a lively road. Frequentpedestrians and vehicles will keep waking up the camera, resulting in frequent alarm messages and extremely fast power consumption.

Please do not install the camera in a position away from the router. The product needs a good Wi-Fi signal to work well.

When installing the camera, it’s not suggested to make the PIR sensor vertically face the moving object. Otherwise, it may not detect the motion events. It is suggested that the angle between the PIR sensor and the detected object be larger than 15 degrees.

image 465

6. Function Introduction

6.1 APP Interface Introduction

image 466
image 467
1Enter the video browsing page
2Multi-screen viewing
3Add a camera
4Device share
5Check the picture and video of the alarm
6Cloud storage
7Camera settings options, such as SDcard, alarm setting, etc.
8Turn on/off the speaker
9Video definition Settings (SD, HD)
10Full-screen option
11SD card video playback
12Cloud storage video playback
13Screenshot button
14Intercom option: long press it to talk
15Record button (Manually capture video)
16The human motion detection function
17PTZ remote control
18Album (Store screenshots and manual video files)
19Video Timeline: you can drag it to select the time
20Timeline zoom button
21Calendar option, click it to select the date
22Choose the alarm video footage
23Screenshot, video snapshot
24Recording (First click to start recording, then click again to end recording)
25Album(Store screenshots and manual video files)
26Modify the name of your camera
27Get device information (network information, Mac address, time zone)
28Installation guide, Network Diagnosis
29Turn on/off the indicator, night vision setting, battery capacity
30Set the recording time and alarm interval
31Motion detective setting
32Recording setting; SD card capacity checking
33The firmware version of your camera
34Delete the device

6.2 Device share

The steps for sharing your cameras with other users:

1) Invite your friends to download and install the “CloudEdge” APP and log in.

2) Click on the “Device Share” icon to watch the operation video and follow the steps to complete device sharing.

Tip: When sharing, please ensure that your APP account is registered in the same region. Otherwise, you will not be able to share successfully.

7. SD Card Record

The product doesn’t include an SD card. If you need an SD card to store files, please buy it by yourself.

SD card requirements:

  • 1) it is recommended to use San Disk, Samsung, and other brand cards;
  • 2) Support 8-128GB capacity;
  • 3) it is recommended to use a standard Class 10 SD card;
  • 4) Only the FAT32 format is supported.

Note: Insert the memory card into the SD card slot of the device, and the device will automatically start saving videos.

How do you watch the videos on an SD card?

Method 1: Click the “History” or “Video Play” button of the alarm information icon in the APP to enter the video playback interface. Drag the timeline or select the alarm point to find the corresponding time period record.

Method 2: Insert the SD card into the computer and convert the video format to MP4 via 3rd-party. When the video is in MP4 format, you can directly watch it on the computer.

8. PIR motion detection settings

Enter the application-“Parameter Setting”-Motion Detection” interface.

image 468
SensitivityDetecting Distance (For moving objects)
Level 1-3 (Low)Up to 4-5 meters
Level 4-7(Med)Up to 5-8 meters
Level 8-10(High)Up to 8-13 meters

Warm Tip:

When you encounter the following problems in using this camera, you can adjust the motion detection sensitivity to solve them.

Note:

1) It is recommended that you set the alarm sensitivity to levels 8-10 if you have a missed or delayed alarm frequently.

2) it is advised that you set the alarm sensitivity to level 1-3 if having a false alarm
frequently.

3) it is recommended that you adjust the sensitivity to a lower level. Alarm sensitivity and detecting distance from high level are too far to easily false triggering. In winter, it easily causes false alarms because of the bigger temperature range. Also, the PIR alarm will be interfered with by weather and temperature.

4) it is recommended that you adjust the sensitivity to a higher level. in summer, it causes missed or delayed alarms because of a smaller temperature range.

5) if you notice the poor performance of motion detection in the night environment, try to turn off “Night Detection.”

9. Battery Management

9.1 Charging the camera

it is recommended to use a 5V/2A power adapter for charging. Please use the USB cable in the package to charge this camera.

Note: if a 5V/2A power adapter is not available, other sizes of 5V power heads can also be charged.

How do you judge whether the charging is successful?

The device’s charging indicator light is red, which means it is charging. A blue light means that charging is complete. It will take approximately 10 hours or more to charge fully.

What should I do if the charge fails?

1)Determine whether the power adapter is good; try another one.

2) Determine whether the USB charging cable is good; try another one.

3) The charging indicator may be defective; please check the charging condition of the phone APP

4) Determine whether the charging port of the device is not in good contact with the USB charging cable.

5) The device has a low-temperature charging protection module; please don’t charge the device at low temperatures.

6)Contact customer service: [email protected]

9.2 Battery life

If the device does not detect a moving object, the device will enter sleep mode, reducing its power consumption.

If the device detects a moving object, it quickly wakes up, starts within 1 second, and takes a screenshot with the recorded video.

Warm tip: When the temperature is below -20 °C, the battery may enter self-protection mode, which causes the camera to shut down automatically. But if the temperature rises, the battery will automatically return to its normal state.

At low temperatures, if you need to charge this camera, please place it at home for several hours first. At room temperature, the self-protection mode of the battery will automatically be shut off to charge this camera safely.

Why the battery life of my device is poor?

A. Please check whether the number of alarms is too frequent because the working time of the device determines the battery life. The more frequent PIR wake-ups, the faster the battery consumes due to the longer working time if it is recommended to lower the motion detection sensitivity of the device appropriately and set the alarm interval and alarm time plan. Note: Outdoor air conditioning units, moving cars, and passing pedestrians will cause frequent alarms. Please adjust the angle of the device to avoid these objects.)

B. In cold weather, the battery capacity will be reduced, which will affect the endurance of the device.

C.Contact customer service: [email protected]

10.FAQs

For more detailed FAQs, please log in to the app and search for “Me”-“FAQ”-“HelpDocument”_Battery Camera.”

The device prompts offline.

1) Check whether the equipment is in the power-on state and observe whether the working light of the equipment is on normally.

2) Check whether the Wi-Fi network is in good condition and restart the router.

3) if the device is located far away from the router, which results in the inability to obtain a good Wi-Fi signal, it is recommended to move the router to a closer place or add a Wi-Fi amplifier to improve the Wi-Fi performance of the home

4) Delete the camera from your CloudEdge account and add it again after resetting the device. Check whether the device firmware and application program are the latest version.

Update router or Wi-Fi password?

Delete the camera from your CloudEdge account. After resetting the device, use the new Wi-Fi and password to add it again.

Can’t play historical video?

1) Check the status of the SD card in “Settings to ensure that the SD card has been
successfully recognized.

2) Reinsert the SD card.

3) In the application, format the SD card

4) Try another new SD card.

Alarm push frequently?

1)In the app, lower the sensitivity of the motion detection alarm.

2) Check whether there are objects that interfere with and trigger the PIR sensor in the field of view of the device, such as the outdoor unit of the air conditioner, driving cars, and passing pedestrians. The angle of the device can be adjusted appropriately to avoid these easily disturbing objects

3) Turn on “human motion detection” and use the humanoid algorithm to filter useless alarms.

image 469

The phone cannot receive the alarm push.

1) Turn on all the push permissions of the”CloudEdge” application in the system setting of your mobile phone.

2) Make sure that the device’s motion detection function is successfully turned on.

3) Restart the phone and clear the cache on Android phones.

4) Check whether the network is good

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top