ๆณจ๏ผใใใฅใขใซใฎๅ ๅฎนใฏใ็ถ็ถ็ใช่ฃฝๅๆน่ฏใฎๆน้ใซๅบใฅใใไบๅใชใๅคๆดใใใใใจใใใใพใใ
Warranty Service
Thank you for purchasing products from GEREE. We distinguish ourselves by an unrelenting commitment to excellence in terms of our reliable quality, robust design, and wholehearted service. All items you buy from GEREE enjoy lifetime warranty service. Should you have any questions about using our products, please feel free to contact us by e-mail. A reply email with a solution will reach you within 24 hours.
In order to provide you with a wonderful experience, we’d like to remind you of the following things:
1. Please install the doorbell on the outermost front of the door; please try not to install the doorbell in direct sunlight.
2, please get in touch with us directly if you want to use our cloud service without extra payment or the indoor chime
3. Please feel free to contact us if there are any further problems when using our products.
Your advice or suggestions will be highly appreciated and welcomed.
Meet the doorbell
The doorbell comes with a 4500mAh rechargeable Li-ion battery
Meet the chime(Optional)
Chime can be powered either by AA batteries or a Micro USB compatible phone charger.
Please mind the battery polarities when installing
Charge your doorbell
Prior to the doorbell installation, please charge up your doorbell for about 8-10 hours till the charging LED turns BLUE from RED.
Compatible charger ( not provided ): USB-compatible mobile phone charger (DG-5V 1A-2A).
App download
Search ‘CloudEdge’ in the App stores or scan the below QR code to download the App!
Set up doorbell
Press your doorbell to activate, and you will see the LED indicator flashes red (once per second). lf not, press and hold reset button for 5 seconds to restore factory defaults.
Start setting up your doorbell following the in-app instructions.
ใใณใ
Please operate the setup near your Wi-Fi router.
ใไฝฟใใฎๆบๅธฏ้ป่ฉฑใ2.4GHzใฎWi-Fiใซๆฅ็ถใใใฆใใใใจใใ็ขบ่ชใใ ใใใ
Make sure the doorbell is turned on and its indicator LED is flashing red. If not, press and hold RESET for 5 seconds.
Wi-Fiไฟกๅทใ่ฏๅฅฝใงใWi-Fiใในใฏใผใใๆญฃใใใใจใ็ขบ่ชใใใ
Pair with your indoor chime(Optional)
Click the SETTING button on the chime, and the chime will be in pairing mode for 20 seconds, with its red LED flashing.
Press the doorbell button to send a pairing signal, and your chime will sound to react, together with its blue LED flashing.Chime pairing succeeds.
ใใฃใคใ ใฎ่จญๅฎใ
็ไฟก้ณใฎ้ธๆใ
ใฏใชใใฏใใใจ็ไฟก้ณใๅคๆดใงใใพใใ
้ณ้่ชฟ็ฏใใฟใณใ
ใฏใชใใฏใง้ณ้่ชฟ็ฏ๏ผ
level 1: 110 dB; level 2:100 dB
level 3: 90 dB; level 4: 80 dB
Settings.
Click to enter/quit pairing mode;
Press & hold settings for 5 seconds to restore factory defaults
ๆณจ๏ผ
The indoor chime may NOT be included in the package
Install Your doorbell
Select a location for your doorbell.
(OPTIONAL]Install at an angle
ไปฅไธใฎ่งๅบฆไปใใใฉใฑใใใ่ณผๅ ฅใใใฐใใใขใใซใ็นๅฎใฎ่งๅบฆใซๅใใใใจใใงใใพใใ
Standard installation.
(1)Standard installation.
(2) 3M installation.
ใใณใ
โขThe doorbell cannot be stuck to the rough walls and the surface that is easy to oxidize, such as lime walls/the surface of the iron. Otherwise, the doorbell will fall off because the viscosity is too low.
In this situation, we recommend using a screw to install the doorbell so that we can ensure the safety, stability, and durability of the installation.
Tamper Alarm
Anti-theft Tamper Alarm. You can also enable the anti-theft alarm in doorbell settings.
Tamper Alarm On
With the tamper alarm on, your doorbell detects disassembly by the trigger on its back, and then a 30-second siren alarm will be triggered. In the meantime, video recording will get started, and an alarm notification will be pushed to the owner’s APP account.
Tamper Alarm Off
You can disable the tamper alarm in the doorbell settings. And detach the doorbell without any alarm for battery recharge or regular maintenance.