[2024]ieGeek Bell J1 Doorbell Camera User Manual

FCC 声明

本设备已经过测试，符合 FCC 规则第 15 部分对 B 类数字设备的限制要求。

这些限制旨在为住宅安装提供合理的保护，防止有害干扰。本设备会产生、使用和辐射无线电频率能量，如果不按照说明进行安装和使用，可能会对无线电通信造成有害干扰。但是，不能保证在特定安装环境中不会产生干扰。如果本设备确实对无线电或电视接收造成有害干扰（可通过关闭和打开设备来确定），建议用户尝试通过以下一项或多项措施来纠正干扰：

-调整接收天线的方向或位置。

-增加设备与接收器之间的距离。

-将设备连接到与接收器连接的电路不同的插座上。

-请向经销商或有经验的无线电/电视技术人员寻求帮助

不遵守规定可能导致用户无权操作本设备。(例如：在连接计算机或外围设备时，只能使用屏蔽接口电缆）。任何未经合规性责任方明确批准的更改或修改都可能导致用户无权操作本设备。本设备符合 FCC 规则第 15 部分的规定。操作须符合以下两个条件：

1) 本设备不得造成有害干扰

2) 本设备必须接受任何接收到的干扰，包括可能导致意外运行的干扰。

FCC 辐射暴露声明：本设备符合 FCC 规定的不受控制环境的辐射暴露限值。安装和操作本设备时，散热器与身体之间的距离至少应为 20 厘米。

(FCC ID: 2AUSP-BELL)

1.售后支持

感谢您购买 ieGeek 电池 WIFI 安全摄像机。我们提供12个月的保修服务。如果您有任何问题或建议，请随时通过亚马逊留言或发送邮件至我们的官方邮箱（[email protected]）与我们联系。我们将为您提供最好的服务。

请注意：

相机仅支持 2.4GHz WI-Fl，不支持 5GHz WIFI。

请确保 Wi-Fi 信号强度大于 85%；如果摄像机距离信号源较远，将无法首次成功连接。

• The smart video doorbell only supports 2.4GHz WIFI; it doesn’t support 5GHz WIFI.
• Please ensure that the Wi-Fi signal strength is over over85%; if the smart video doorbell is far away from the signal source, it won’t be connected successfully for the first time.
• If your router is connected to too many devices, the smart video doorbell will fail to connect to Wi-Fi because of the IP address conflict.
• It will consume the battery’s power if you watch live footage or recorded videos from the SD card.·
• Manually taking snapshots and recording files are saved on mobile. Events snapshot files are saved in the Cloud. Events recording files are saved on a Micro SD card.
• Pay attention to the positive and negative poles of the battery when installing and removing the battery to prevent explosion.
• This smart video doorbell does not support PC Browser and Software.
• Video playback works in the ieGeek Cam APP only. It does not support the 3rd party player.

2/what’s in the Box

Please consult below checklist for all the components.

03/Meet the Doorbell

注意：

04/Meet the Chime

05/APP Installation and Account Registration

5.1 DOWNLOAD ‘CLOUDEDGE’APP

Method 1: Download the ‘ieGeek Cam’ or ‘CloudEdge’ APP from APP Store (ios)or Play Store (Android);

Method 2: Scan the ‘ieGeek Cam ‘ APP OR code to download it.

Tips: Please turn on the two permissions below when using this APP for the first time.

1. Allow the ‘ieGeek Cam’ APP to access mobile cellular data and wireless LAN, or it will fail to add a doorbell.

2. Allow the ‘ieGeek Cam’ APP to receive pushed messages, or the cellphone will not receive alarm push when motion detection or audible alarm is triggered.

5.2 REGISTER ACCOUNT

New users need to register by e-mail, click Register and follow the steps to complete the registration of the account, then log in.

注意：

When registering a new account, please choose the region in which you are actually in. (Different registered regions can’t share the doorbell.)

Please choose to register by e-mail.

06/How to Add Doorbellto APP

6.1 INSTALL MICRO SD CARD

Please insert a Micro SD card to record videos and playback when motion is detected. (The SD card is not included; the doorbell supports up to 128GB memory card)

注意：

Please insert the Micro SD card before powering it on; otherwise, the SD card can not be detected.

6.2 BATTERY CHARGING

门铃内的电池未按照运输安全规定充满电。

Please charge the batteries with a compatible wall charger (not included) and the provided dedicated charging cable for about 8~10 hours prior to installation.

6.3 WI-FI SET UP

在开始 Wi-Fi 配置之前，请注意以下几点：

1. The doorbell works with 2.4 GHz Wi-Fi but not with 5 GHz Wi-Fi.

2. Avoid using special characters or symbols like ) (@~!#$%^&*…, either in your Wi-Fi name or password.

3. Perform the configuration near your Wi-Fi router.

4. Make sure the range between the device and your
router is within 10 meters or 33 feet.

5. Check if your router is up and functioning.

6. Check your device is away from all devices that cause interference (such as microwaves, baby monitors, or other electronic devices).

Launch the ‘ieGeek Cam’ App and register an account with your mobile phone number or email ID. Start the Wi-Fi configuration by following the in-app instructions or referring to the following guiding steps.

Guiding steps:

6.4 RUN A TEST

After setup, tap on the live view window in the App for a test. Then, take your doorbell outside to the installation spot and run a test there. Make sure the installation spot is covered by a strong 2.4 GHz Wi-Fi signal.

注意：

如果室外门铃的视频质量不如室内，您可能需要将路由器移到离安装位置更近的地方，或者投资购买一个 Wi-Fi 扩展器。

07/Live viewing

注意：

Live viewing will not trigger video recording.

08/Playback

You can also back up video to the cloud if you have activated the cloud storage service (7-Days Free Trial available).

09/Leave Voice Messages

Maximum three voice messages (Max. 10 seconds each)
can be pre-recorded into the doorbell, which enables you to quickly respond to your visitors when you are not convenient to answer the doorbell call.

STEPS: Setting –> Voice Message –> Press and hold this icon to record voice messages –> Push the doorbell button–> Play the selected voice message in reply to the doorbell call.

10/Share Your Device

10.1 sharing by account searching

STEPS: Settings>>Device Share>>Tap on “Add”>>Tap on “Account”>>Type in account ID>>Confirm Sharing.

10.2 Sharing by QR code scanning

The new users can show their QR codes to the
administrator, and share devices by QR Code scanning.

Find your QR code: Run CloudEdge App >> Tap on >> “User Name” >> “My QR Code” >> Let the administrator scan your QR Code.

注意：

1. Guide your family members to download and install the CloudEdge App and register an account prior to device-sharing.

2. There is no limitation on the number of users sharing one device.

3. Only the administrator has access to the settings menu. Other users can only live view & playback.

4. All users will receive doorbell calls and alarm notifications.

5. Many users can access the doorbell simultaneously to live view or playback.

11/Connect the Chime

11.1 Put the included Battery into the chime

The chime is wireless and powered by three units of AAA Batteries, which are already included in the package. You can install it anywhere in your home.

11.2 Click the reset button

Click the RESET button on the wireless chime only once, and you will see the LED indicator flashing red, indicating the chime is in pairing mode.

11.3 Press the doorbell button

Press the doorbell button, and the Chime will sound to react. Pairing succeeds, and the indicator on the chime will be in solid blue.

11.4 Chime settings

You can enter the chime setting page following the setting steps below so as to unbind the connection with the doorbell.

注意：

1. Your doorbell communicates with the chime via Radio Frequency but not WiFi. You can even do the pairing prior to the doorbell configuration.

2. You can add many chimes to one doorbell and vice versa.

3. Press and hold the RESET button on the chime for 5 seconds till the indicator flashes red three times, and you can also release the connection between the chime and its connected doorbell.

12/Installation

12.1 Select location

建议将门铃安装在离地面至少 5 英尺（160 厘米）的位置，以获得最佳视角和移动侦测性能。

12.2 Go wireless installation

1. Detach the doorbell from the bracket by using a thimble.

2. Bracket installation: Mount the bracket on the wall with screws & anchors or double-sided adhesive tape.

3. Mount your doorbell to the fixed bracket. Make sure it reaches the bottom when you can hear a click.

4. All set, congratulations! Now, you can press the doorbell button to try it out.

13/How to Reduce False Alarms

To reduce false alarms, please note that:

• Do not install the doorbell in a position facing any objects with bright lights, including sunshine, bright lamp lights, etc.
• Do not place the doorbell too close to a place where there are frequently moving vehicles. Based on numerous tests, the recommended distance between the doorbell and vehicles is 15 meters (55 ft).
• 远离插座，包括空调出风口、加湿器出风口、投影仪的传热口等。
• Do not let the doorbell face the mirror, glass, or wall directly.
• Keep the doorbell at least 1 meter away from any
  wireless devices in order to avoid wireless interference, including Wi-Fi routers and phones.

14/Troubleshooting

Q1: 为什么我没有为门铃设置 Wi-Fi？

A1:
1. The device works with 2.4GHz Wi-Fi only but does not support 5GHz Wi-Fi

2. The Wi-Fi network is not good; try to keep the camera near the Wi-Fi router when setting it up.

3. The Wi-Fi password is wrong. Please check if there are special characters in the password or if the network is specially encrypted

问题 2：如何知道我使用的是 2.4G 还是 5G Wi-Fi？

A2: Please check the user manual of your Router or call the network operator for help.

问题 3：必须在同一个 WiFi 上才能看到摄像头，还是在任何地方都能通过互联网看到？

A3: You can view the camera from anywhere if your camera is well connected to the internet.

Q4: Do any of the recordings get saved to the cloud?

A4:It supports SD card recording as well as cloud storage. You can activate the cloud storage service App.

Q5: What happens when the SD is full?

A5: When the memory card is full, the camera automatically erases the oldest footage.

Q6: Why does it lose wifi connection?

Please check the network connection of your phone and the Wi-Fi router. If the network signal is not strong, you may need to move your router closer to the device or invest in an extender.

Q7: Can motion detection be disabled?

A7:Yes, sure. The recording is triggered by detected emotions. You can set up the sensitivity or disable motion detection in the settings menu.

Q8:Do we get a charger for the batteries?

A8:Battery charger is not included. Please charge the batteries with a compatible charger(DC5V 1A~2A) for about 8-10 hours.

Q9: Can we have two or more doorbells at the same residence?

A9: Yes, you can add more than one device to the same residence.