What’s in the box
Please consult this checklist for all parts.
Description
| Micro USB | DC 5V/2A |
| Microphone | Capture sound for your video |
| SD card slot | Support local SD Card storage (Max.128G) |
| Status light | Solid red light on: network is malfunctional Blinking red light: wait for network connection (slowly blinking) connecting the network (fast blinking) Solid blue light on: camera is working correctly |
| Call/Pairing | Press to make a call; long press to pair |
| Reset | Press and hold for 5 seconds with pin to reset the camera (if you have modified settings, they will return to factory defaults) |
| Micro USB | DC 5V/1A |
| Status light of charging | Orange light: Charging Green light: Fully charged |
| Status light of using | Yellow light: The display is on No light: The display is off |
| Microphone | Capture a sound for your video |
| Antenna | Adjust the angle to get better signals |
| ON/OFF button | Long press 5 seconds to turn on and turn off the display |
| Zoom in/out | Zoom the image in 1X, 2X or 4X |
| Menu | Enter the menu interface |
| Direction | Control the rotation directions; select the menu items |
| OK | Confirm |
| Call | Make a call after pressing the button |
| SD card slot | Support local SD Card storage (Max.128G) |
| Reset | Press with pin to reset the display |
Installation
1 Use the included mounting bracket to fix the camera to a clean surface.
2 Or, install the camera on a flat surface.
Connection
Connect the camera to the display.
Power on the camera and the display, and then the camera will connect to the display automatically. The connection is distance-limited, so make the distance between the camera and the display is no more than 200m.
Disconnect the camera to the display:
- Press the Menu button on the display screen, and select > Camera Management.
- Long press the OK button on the display screen to release the binding.
Reconnect the camera to the display:
1. Press the Menu button on the display screen and select > Camera Management.
2. Long press the camera pairing button until the status light is blue in fast blinking.
3. Press the OK button on the display screen to start pairing.
Connect the camera to the App.
The camera can be connected both to the display and the App. Generally, it
is connected to the display by default.
Follow the steps below to connect the camera to the App:
1. Make sure the Wi-Fi network is a 2.4 GHz network, as the camera doesn’t support 5 GHz Wi-Fi.
2. Download the corresponding App on your phone. Register a new account to log in or log in directly.
3. Reset the camera using a pin until the status light is red and slowly blinking.
(You have to connect the camera to the App within 2 minutes; otherwise, you have to reset the camera again.)
4. Follow the step instructions on your smartphone to add the display, and scan the QR code with your camera.
Usage
Rotate the camera
You can adjust the monitoring angle for a better vision.
Press the Menu button on the display screen, and select and press OK to enter the controlling interface. Press the direction buttons to rotate the camera horizontally and vertically for better vision.
Photo & video
Take a photo:
You can take a photo when you want to capture an interesting scene of your baby.
Press the Menu button on the display screen, and select and press OK to take a photo.
Record a video:
You can record a video when you want to capture a meaningful time for your baby.
Press the Menu button on the display screen, select, and press OK to record a video.
View the taken photos and recorded videos:
1. Press the Menu button on the display screen, and select and press OK to enter the interface.
2. Select the camera and date, select the photo or video you want to view and press OK to enter preview mode.
*For a video, press OK to play or pause in the preview mode.
*Press the backup button to quit the preview or return to the main menu.
Play Music
You can play music to soothe your baby when baby is crying or sleeping.
There are various soft music to select. Press the Menu button on the display screen, and select and press OK to enter the music interface. You can select different music, change the music cycle mode, or adjust the music volume.
Feeding reminder
Remind you to feed your baby when you are too busy or when you want to give your baby a regular diet.
1. Press the Menu button on the display screen, and select > Feeding reminder.
2. Press the UP and DOWN direction buttons to select between 4 time options, and press OK to start the time setting.
3. When starting to set up one feeding time, press the LEFT and RIGHT direction buttons to change options between hour, minute, second, and on/off, and press the UP and DOWN direction buttons to change values and select on or off.
4. Press OK to save settings.
5. Select on or off to open or close feeding reminders. You can set up to 4 feeding times one day. And when the set time is up, a feeding alarm will appear on the display screen.
Humiture detection
You can real-time monitor the temperature and humidity of your baby’s room.
When the temperature and humidity are out of range, you can get the alarms immediately and then take measures.
1. Press Menu button on the display screen, and select > Humiture detection.
2. Press the UP and DOWN direction buttons to select options between temperature range, humidity range, and out-of-range reminder, and press OK to start setting.
3. When starting to set up one option, press the LEFT and RIGHT direction buttons to change options, and press the UP and DOWN direction buttons to change values and units.
4. Press OK to save settings.
5. In the Out of Range reminder option, select to turn on or off the alarm when the temperature and humidity are out of range.
Smart care
You can turn on functions of motion detection, noise detection, and cry detection so that you can know the baby’s status immediately, no matter whether you are sleeping, working, cooking, and so on.
1. Press the Menu button on the display screen, and select > Smart care.
2. Press the UP and DOWN direction buttons to select options between motion detection, noise detection, cry detection, and alarm volume, and press OK to start setting.
3. When starting to set up one detection mode, press the LEFT and RIGHT direction buttons to change options, and press the UP and DOWN direction buttons to adjust the sensitivity.
*You can select different sensitivities according to needs. Low is low sensitivity, and high is high sensitivity.
4. When setting up the alarm volume, press the LEFT and RIGHT direction buttons to adjust.
5. Press OK to save settings.
6. There will be an alarm when the set detection is triggered; press OK to stop the alarm.
General setting
Set up brightness:
1. Press the Menu button on the display screen, and select and press OK to enter the interface.
2. Press the UP and DOWN direction buttons to adjust brightness.
Set up time:
1. Press Menu button on the display screen, and select > Time setting.
2. Press the direction buttons to change the date, time, and time displaying mode.
Set up language:
1. Press the Menu button on the display screen and select > Language.
2. Select the language you need.
Set up sleep mode:
You can set up sleep mode to increase standby time.
1. Press Menu button on the display screen, and select > Sleep mode.
2. Select sleep mode as 1 minute, 5 minutes, 10 minutes, 30 minutes, 60 minutes or off.
Turn on and off status indicator:
If you turn on the status indicator, you can get the working status of the camera. You can also turn off the status indicator if you think it will affect your baby’s sleep.
SD card:
1. Press Menu button on the display screen, and select > SD card management. Then, you can view the total capacity and remaining capacity of your SD card.
2. (Optional) You can format the SD card as you need, but make sure that the important data is backed up.
Upgrade:
Make sure your camera is connected to a 2.4 GHz Wi-Fi.
You can upgrade your camera when the upgraded alarm appears. Or Press the Menu button on the display screen and select > Device information to check whether there is an upgrade.
Low battery alarm:
When the camera is low on battery, the low battery alarm will appear on the display screen. Please change the display as soon as possible.
FAQ
Q: The display cannot be previewed properly?
A: Check whether the display has been connected to the camera. If not, pair the camera and the display first.
Q: Cannot find the pairing button?
A: The pairing button is the call button of the camera. Long press the button for 3 seconds, and follow the step instructions of the display. (To enter the pairing interface of the display, press the Menu button on the display screen, and select > Camera Management.)
Q: What if the display screen is stuck and it doesn’t work while pressing any buttons?
A: Press the reset button of your display with the pin, and then long-press the power button of your display to restart it.
Q: Why the camera or the display cannot identify the SD card?
A: Confirm whether the SD card is normally available and the format is FAT32.
Q: Why can’t I get the notifications with my cell phone App when I connect the camera to the display?
A: Please confirm that the App has been running on the phone and the relevant reminder function has been opened; Message notification and authority confirmation in the mobile phone system have been opened.
Pan/Tilt
Rotate your camera by sliding on your smartphone, providing you with a good vision.
Video flip
Flip your video stream up or down for maximum flexibility.
Motion detection
The camera can detect movement, and then the camera will send you push notifications and app alerts.
Crying detection
The camera can detect the crying of your baby, and the camera will send you push notifications and app alerts.
Temperature & humidity detection
The camera can detect the temperature and humidity of the environment,and the camera will send you push notifications and app alerts.
Record
Support 24H continuous recording with high capacity SD storage or Cloud storage.
Day & Night
Never miss a moment, even in complete darkness, with powerful night-vision technology.
