What’s Included
Product Overview
1.Meet Our Video Doorbell
(This manual is a general manual for the P series doorbell. The doorbell you receive may look a little different from the picture in this manual. Please refer to the actual product and use it with confidence)
| 1 | FHD Optical Lens |
| 2 | PIR Motion sensor |
| 3 | Mikrofon |
| 4 | LED Indicator |
| 5 | Doorbell Button |
| 6 | Safety Screw |
| 7 | Anti-theft Alarm Button |
| 8 | Reset key |
| 9 | USB charge port |
| 10 | Micro SD card slot |
| 11 | Charging indicator |
| 12 | Reproduktor |
| Doorbell Button | Short press for more than 1 second to power on the device; Long press for more than 5 seconds to power off the device. |
| Klรญฤ pro resetovรกnรญ | Press and hold RESET for 5 seconds to reset the device. You will hear Bugu’ sound from the device if reset successfully |
| Micro SD Card Slot | Support local micro SD card storage (maximum up to 128G) |
| Charging Indicator | Red: charging Blue: fully charged |
| LED Indicator | Solid on red: Device is abnorma Flashing red slowly: Ready for Wi-Fi connection Flashing red quickly: Wi-Fi connecting Solid on blue : Wi-Fi connected Successfully |
| Mikrofon | Capture sound for your videos |
| Senzor PIR | Can detect moving objects up to 50FT away |
| Reproduktor | Two-way audio output |
| USB charge port | Use USB cable or use 5V/2A USB charger(not as standard) to charge the video doorbell |
2.Meet Our Wireless Chime.
1.Ringtone button
2.Indicator light
3.Connection/volume button: long press to link the doorbell, and short press to change the volume(3 levels of volume adjustments)
4.Battery Slots
5.Horn
APP Download and Device Setup
1.APP Installation
Method 1: Download the ‘SV3C Cloud’ APP from the APP Store(iOS devices) or Google Play (Android devices).
Method 2: Scan the OR code below to download the app
Notes:
Please ALLOW the below two permissions when using the APP at the first time.
1.Allow ‘SV3C Cloud’ to access mobile cellular data and WLAN,otherwise you will not be able to add devices.
2.Allow ‘SV3C Cloud’ to receive messages, otherwise the phone will not receive push notifications when motion sensor is triggered or doorbell button is pressed.
2.Account Registration
Step 1: Open the App, tap Sign up now” to register. If you do already have an account, tap โLog ln” to log in.
Step 2: Enter your email address or phone number (email address is recommended), and check the privacy agreement.Then enter the nick name and password.
Notes:
1) Please tap โAgree” the “User Agreement and Privacy Policy”
2) If the verification code times out, please try again later;
3) If you cannot find the verification code in your email, please check the spam.
3.Device Setup
- 1.Tap Add Device
- 2.Select ‘Smart Doorbell’ and tap ‘Smart Video Doorbell’
- 3.Short press the Doorbell Button for about 1 second to power on the device.
- 4.Tap ‘Next’
- 5.Please long press and hold the Reset Key to reset the device, and wait till the LED indicator to flash RED, tap Next’.(If you cannot find the Reset Key, please refer to the Tips (3) in the end of this part)
- 6.Select your 24Ghz wifi network, and enter the wifi passwords correctly.(If your wifi network is the combined network of the 2.4Ghz and 5GHz network, please refer to Tips (4) in the end of this part)
- 7.Prepare for the QR Code scanning
- 8.Use the doorbell’s camera to scan the OR code shown on your phone screen (not the OR code below on this user manual)
- 9.Wait for the connection.
- 10.Connection successful!
- 11.Put the camera.
Tipy:
1) Please set up the video doorbell in the range of the good wifi signal.
It is recommended to place the video doorbell close to the wifi router while setup.
2) Please short press the Doorbell Button for more than 1 second to power on the device.
3) Please use a card pin or the pen point to press and hold the Reset Key to reset the device, your should hear a sound ‘Bugu’ from the device, which means the device is reset successfully, and please wait till the LED indicatorto flash RED. To find the Reset Key, please remove the mounting bracket from the device,open the silicon cover on the left side of the device, and you will find the Reset Key.
4) Please be noted that our device only supports 2.4Ghz wifi network. Please select the 2.4Ghz wifi network on the Step 6.If your wifi network is a combined network of the 2.4Ghz and the 5Ghz networks, please change it into two separate networks.Here are the steps for your convenience on how to change the combined network into two separated networks.
- a.Go to the router’s “Wireless network settings’ page.
- b. Find the 2.4Ghz settings page, change the Wi-Fi name (SSID) to ‘xx-2.4G’ and save the settings.
- c. Find the 5Ghz settings page, change the Wi-Fi name (SSID) to XX-5G, and save the settings.
- d. After the name is changed, you can find XX-2.4G’ and XX-5G’ respectively inthe Wi-Fi search page of the phone.
Wireless Chime Connection
1.Zapnฤte bezdrรกtovรฝ zvonek
Please remove the AAA battery protective film first and mount the batteries in the correct direction per the positive and negative marks on the slot of the wireless chime.(The model of the battery in thewireless chime is the AAA battery, you can easily get the replacement from the market if the provided one is dead.The AAA battery is not rechargeable.)
2.Dlouze stisknฤte tlaฤรญtko Pลipojenรญ/Hlasitost a kontrolka zaฤne blikat modลe, coลพ znamenรก, ลพe bezdrรกtovรฝ zvonek je pลipraven k propojenรญ.
3.Within 5 seconds after you completed step 2, please short press the button of the video doorbell to link. The chime will sing, which means that the connection is successful.(please place the video doorbell close to the wireless chime before setting up their connection)
4.Chime settings
1.To change the volume of the wireless chime, please short press the Connection/Volume Button to change the volume.
2.To change the ringtone of the wireless chime, please short press the Ringtone button to select your likes.
Tipy
1.You can link unlimited chimes to one video doorbell, and vice versa
2.Long press the Connection/Volume button to get the chime ready to link or get the chime disconnected with the connected video doorbell.
Install the Video Doorbell
1.Take off the mounting bracket from the video doorbell.
2.Mount the bracket on the wall:
Option1: Mark the screw holes and mount the bracket on your wall using the provided screws.
Option 2: Using the adhesive stickers, which are very sturdy. Please be noted that the adhesive stickers take approximately 1 hour to reach half of them maximum bond strength and 72 hours to reach the final bond strength.
3.Mount the device into the fixed bracket.
4.Tighten the security screw at the bottom of the bracket.
5.All set! Press the doorbell button to have a test.
ลeลกenรญ problรฉmลฏ
1.APP can’t be registered successfully
Zkontrolujte, zda je sรญลฅ mobilnรญho telefonu v poลรกdku;
Please tick the software service agreement and privacy policy;
Zkontrolujte, zda se ovฤลovacรญ kรณd nenachรกzรญ ve spamu;
Please use WIFl to register if mobile network cannot be registered.If the mobile network and WIFl prompts cannot obtain the server address, please check if other software can be used normally;
Bฤhem instalace povolte aplikaci, aby zรญskala vaลกi polohu a vลกechna oprรกvnฤnรญ, systรฉm automaticky zajistรญ nejlepลกรญ server;
If above solutions still can’t be effective, we recommend you to uninstall and install the app again, the current location and all permissions are allowed during the installation.
2.Unable to connect to the network
1) Unable to connect to WiFi:
Povolte DHCP smฤrovaฤe;
Please make sure the camera is not in the blacklist in MAC settingsof the router;
Vypnฤte 5GHz WiFi v routeru (Poznรกmka: Pokud nemลฏลพete vypnout 5Ghz WiFi, kontaktujte vรฝrobce routeru);
After connecting to the 24GHz WiFi, please check your mobile phone if it can access the Internet;
Ujistฤte se, ลพe sรญลฅ vaลกich mobilnรญch zaลรญzenรญ spadรก pod stejnรฝ sรญลฅovรฝ router fotoaparรกtu;
Potรฉ, co je sรญลฅ v normรกlu, resetujte fotoaparรกt a znovu se pลipojte.
2) Heslo WiFi
Check the WiFi password connected of the camera same as the WiFi password of the connected router.
Check if the entered WiFi password has space or special characters(@,#,%,8).
3) Odpojenรก 5Ghz WiFi, nelze se pลipojit k WiFi
Vypnฤte sรญลฅ 5Ghz a ponechte si sรญลฅ 2,4Ghz.
Disconnect the router and then restart the camera;
WiFi name should not contains words like 5Ghz.
3.No pop-up message for motion detection alarm
Povolte nastavenรญ oprรกvnฤnรญ v systรฉmovรฝch nastavenรญch mobilnรญho zaลรญzenรญ, aby APP mohla pลijรญmat oznรกmenรญ o zprรกvรกch push;
Nฤkterรฉ telefony se systรฉmem Android nemohou pลijรญmat push informace o budรญku;
Please turn on the motion detection in APP;
SMS a e-mailovรฉ upomรญnky nejsou v tuto chvรญli podporovรกny.
4.Motion detection messages prompt frequently
Pokud je citlivost detekce pohybu pลรญliลก vysokรก, mohou svฤtelnรฉ zmฤny rovnฤลพ zpลฏsobit poplach;
Snรญลพenรญ citlivosti alarmลฏ (doporuฤenรก nรญzkรก รบroveล)
5.Cloud Storage and SD Card Storage?
You can choose either use local SD card or cloud to save the videos. This product does not include an SD card. If you need an SD card to store your files, please purchase it by yourself. It’s required that the SD card supports 8-128G capacity and FAT32 format.The standard Class 10 SD card is recommended.
You can also use the cloud storage (free for 7 days), but subscription fee is required.It’s optional.
6.After inserting SD, it displays damaged
Before inserting the SD card, disconnect the power. Connect the power to start after plugging in the card;
Pลed pouลพitรญm karty SD je nutnรฉ kartu SD naformรกtovat v poฤรญtaฤi.
7.How to share the device?
Tรฉto funkce lze dosรกhnout pomocรญ funkce "Sdรญlenรญ zaลรญzenรญ".
1) Firstly your family needs to install the app, sign up a new account.login in the new account, and from the APP please find the QR code of the new account;
2)Open your device, login in your โCloudedge” account, go to the setting page and tap โDevice Shareโ,tap “Add” and tap “Scan QR Code” Use your phone’s camera to scan the QR code of the new account that you want to share with.