Tips
Micro SD card
lf you don’t have a Micro-SD card available at home now anddon’t want to spend extra time choosing one, please contact usdirectly. TIP: the Micro-SD card gotta be formated after insertingit up.
Select 2.4G wifi
The product only supports 2.4G wifi, please select 2.4G wifiwhen setting up the app.
Select installation location.
Please use your mobile phone to test the coverage of the homewifi signal at the planned installation position before installation, so that the product can receive a better signal.
What’s Included
Product overview
CAUTION: Please insert the Micro SD Card according to thedirection shown in the diagram. Micro SD Card might JAM ifinserted incorrectly and device could be damaged.
SD Card Port: Support micro SD card for local storage (Max128GB).
Reset button: Used to restore the camera to factory settings(Press and hold on 5-8s).
CloudEdge App installation and Setup
Search ” CloudEdge” on apple store or google play to downloadthe app.
Mounting the camera
Select Height and location
Hang dekcoCam 7-10 ft (78-118 inch) above the ground.Thisheight maximizes the detection range of the motion detectionof dekcoCam.Avoid placing dekcoCam under direct sunlight.
Make sure of the reserving wire length
Reserve 10cm of end wire, fix the bottom base, avoid wiredamage when camera turns.
Test the Wifi signal at installation position
Use cell phone to test Wifi signal quality at the installationposition before installing camera, make sure the Wifi router canprovide good Wifi signal.
Register an account
The CloudEdge app that is necessary to operate the camera.Signing up for storage in the cloud is totally optional and isreally not necessary when using an onboard Micro SD card.
3.Set up an “Nickname” and “Password” for your APP, cick “Doneto complete.
Set up WiFi for the camera
- Bring both your mobile phone and your DEKCO camera closeto your router (max distance of 5 meters/16 feet).
Note: The DEKCO camera can only connect to a 2.4 GHz WiFi signal. It does not support using a 5 GHz signal. Thereforeplease ensure you connect to a 2.4 GHz signal on your networkas shown in the below illustration.
Log in to “CloudEdge”, then tap the “+” icon in the center. Tap”Camera” to add device.
Reset the device and wait for a flashing RED indicator light,then tap “Next”.
Selecting the Wi-Fi the device needs to connected with (yourhome Wi-Fi), input the password and click “Next”.
Use the DEKCO camera to scan the QR code on your mobilephone as noted below. When the scan is complete you willhear a prompt tone then push Next.
When connecting, as stated earlier, you should make sure thatthe router, mobile phone and the DEKCO camera and are asclose together as possible (max 5 meters/16 feet).When asuccessful connection occurs a “click” will be heard and acheckmark will be noted as shown below. The DEKCO camerawill show with a numerical name that can be changed to yourlikings such as Driveway Camera, Street View Camera orwhatever.
