DEKCO DC5E HD WIFI SECURITY CAMERA User Manual

image 88

What’s Included

image 89

Product overview

image 90

CAUTION: Please insert the Micro SD Card according to the direction shown in thediagram. Micro SD Card might jJAM if inserted incorrectly and device could be
damaged.

SD Card Port: Support micro SD card for local storage (Max 128GB).

Reset button: Used to restore the camera to factory settings (Press and hold on5-8s)

Card capacity requirements:8-128GB

Read and write speed requirements: class10 level

File format: FAT32.

CloudEdge App installation and Setup

Search ” CloudEdge” on apple store or google play to download the app.

Mounting the camera

Select Height and location

Hang dekcoCam 7-10ft (78-118 inch) above the ground. This height maximizes thedetection range of the motion sensor of dekco Cam, Avoid placing dekcoa Cam under direct sunlight.

image 91

Installation

  1. Drilling according to position sticker, drill bit: 15/64″(6 mm).
  2. Insert the plugs
  3. Tighten the screw.
image 92

Test the Wifi signal at installation position

Use cell phone to test Wifi signal quality at the installation position beforeinstalling camera, make sure the Wifi router can provide good Wifi signal.

image 93

Register an account

The CloudEdge app that is necessary to operate the camera.Signing up for storage in the cloud is totally optional and is really not necessarywhen using an onboard Micro SD card.

  1. Open the APP to sign up an account. Go to the login interface, and click “SignUp”.
  2. Sign up with your email address, and click “Next”
  3. Set up an “Nickname” and “Password” for your APP, click “Done” to complete.
image 94

Set up WiFi for the camera

Bring both your mobile phone and your DEKCO camera close to your router(max distance of 5 meters/16 feet).

Note: The DEKCO camera can only connect to a 2.4 GHz WiFi signal. lt does notsupport using a 5 GHz signal. Therefore, please ensure you connect to a 2.4 GHzsignal on your network as shown in the below illustration.

image 95

Log in to “CloudEdge”, then tap the “+” icon in the center. Tap “Smart Camera’to add device.

image 96

Reset the device and wait for a flashing RED indicator light, then tap “Next”

image 97

Selecting the Wi-Fi the device needs to connected with (your home Wi-Fi), inputthe password and click “Next”

image 98

Use the DEKCO camera to scan the QR code on your mobile phone as notedbelow. When the scan is complete you will hear a prompt tone then push Next.

image 99

When connecting, as stated earlier, you should make sure that the router.mobile phone and the DEKCO camera and are as close together as possible(max 5 meters/16 feet). When a successful connection occurs a “click” will beheard and a checkmark will be noted as shown below. The DEKCO camera willshow with a numerical name that can be changed to your likings such asDriveway Camera, Street View Camera or whatever.

image 100

FAQ

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top