Doorbell Bell 24T Quick Guide

image 352

What’s in the box

Consult the checklist below for all components.

image 353
  • Bracket removing tool used to take doorbell off of bracket.
    Please keep it handy.

Description

image 354
PowerDC 5V/1A(Battery); AC 12~24V (AC supply)
Doorbell buttonPress the button to activate the doorbell
Status lightSolid red light on: network is malfunctional
Blinking red light: wait for network connection (slowly)
Connecting the network (fast)
Solid blue light on: camera is working correctly
MicrophoneCapture sound for your video
SD card slotSupport local SD Card storage (Max.128G)
ResetPress and hold on for 5 seconds with pin to reset the
doorbell (unable to unbind the bell from account)
Charging
indicator
Red indicator solids on: battery is charging
Blue indicator solids on: Fully charged

Installation

Bracket Removing

image 355
  1. On the live view interface of the APP, turn off the tamper alarm function.
  2. Insert the bracket-removing tool into the slot with a red box in the picture above, and the bracket will pop out automatically.

Bracket Installation (Screws)

image 356
  1. Install the bracket to the wall with screws.
  2. Align the bell to the bracket.
  3. Push the bell down firmly until it is secure.

Bracket Installation (Tape)

image 357
  1. Remove the film from one side of the tape and stick to the red area in the picture above.
  2. Once adhered, removed the film from the other side of the take and stick to the wall.

Connection

Download

CloudEdge is available for both iOS and Android OS. Search the name ‘CloudEdge’ in the App Store or Google Play, or scan the QR code to download the app.

image 339

Add device

Log in to the CloudEdge, select “Add Device”, and add the smart camera to the App according to the screen tips(Make the smart camera close to the router when configuring).

image 340

NOTE: If you need to re-select the WiFi network, please press and hold the “RESET” button for 5 seconds. The device will restart, and the indicator will flash red.

Function

Remote wake-up

The camera will be in sleep mode to save power; you can have a preview in the App.

Full-duplex audio

You can see and hear the visitor in your App from the camera.

PIR

When the camera detects someone stopping by, it sends an alarm message to your cell phone.

Low battery alarm

You can set a low-battery alarm threshold in your phone App. The threshold is set to a minimum of 10% and a maximum of 50%. When the battery power of the camera is lower than the set threshold, the App will have a reminder.

Record

Using an SD card or Opening the Cloud-Storage Service to keep recording for every moment.

Day & Night

Powerful night vision means no interruptions, even in complete darkness.

image 341

FAQ

Q: The device cannot be previewed properly?

A: Check whether the network is normal. You can place the camera close to the router, and if not, it is recommended that the device be reset and added again.

Q: Why is it still on the list of devices after resetting?

A: The reset device only resets the network configuration of the camera but cannot change the configuration on the App. Remove the camera, and it must be deleted by the App.

Q: How do you cut the camera network to another router?

A: First, remove and reset the device on the App and then configure the device again by the App.

Q: Why doesn’t the device identify the SD card?

A: it is recommended to plug in an SD card after a power cut. Confirm whether the SD card is normally available and the format is FAT32. And the TFcard can’t be identified when the internet environment is not good.

Q: Why can’t I get the notifications with my cell phone app?

A: Please confirm that the App has been running on the phone and the relevant reminder function has been opened; Message notification and authority confirmation in the mobile phone system has been opened

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top