GEREE Bell J9 User Manual

Note: Manual contents are subject to change without notice inaccordance with our polivy of continuous product improvement.

Warranty Service

Thank you for purchasing products from GEREE. We distinguish ourselves byan unrelenting commitment to excellence in terms of our reliable quality, robust design and whole-hearted service. All items you bought from GEREE enjoy lifetime warrany service. Should you haveany questions in using our products, please feel free to contact us by e-mail.A reply email with solution will reach you within 24 hours.

In order to provide you a wonderful experience ,we’d like to remind you the following things:

1,Please install the doorbell on the outermost front of the door, Please try not to install the doorbell in direct sunlight.

2,Please contact us directly if you want to use our cloud service without extra payment or the indoor chime

3,Please feel free to contact us if there is any further problems when using our products.

Your advice or suggestions will be highly appreciated and welcomed.

Meet the doorbell

Meet the chime(Optional)

Please mind the battery polarities when installing

Charge your doorbell

Prior to the doorbell installation, please charge up your doorbell for about 8-10 hours till the charging LED turns BLUE from RED

Compatible charger ( not provided ):USB compatible mobile phone charger (DG-5V 1A-2A).

App download

Search ‘Cloudot’ in the App stores or scan below QRcodes to download the App!

Set up doorbell

Press your doorbell to activate, and you will see the LED indicator flashes red (once per second). lf not, press and hold reset button for 5 seconds to restore factory defaults.

Start setting up your doorbell following the in-app instructions.

Tips

Please operate the setup near your Wi-Fi router.

Make sure your phone is connecting to a 2.4GHz Wi-Fi.

Make sure the doorbell is turned on, and its indicator LED is flashing red. If not, press and hold RESET for 5 seconds.

Ensure the Wi-Fi signalis good, and the Wi-Fi password iscorrect.

Pair with your indoor chime(Optional)

Click the SETTING button on the chime, and the chime will be in pairing mode for 20 seconds, with its red LED flashing.

Press the doorbell button to send a pairing signal, and your chime will sound to react, together with its blue LED flashing.Chime pairing succeeds.

Chime settings.

Settings.

Click to enter/quit pairing mode;

Press & hold for 5 seconds to restore factory defaults

Volume control button.

Click to control volume:

level 1: 110 dB; level 2:100 dB
level 3: 90 dB; level 4: 80 dB

Ringtone selection.

Click to change ringtone (4 ringtones available)

Install Your doorbell

Select location for your doorbell.

Mount your doorbell.

Trouble Shooting

Is the video doorbell powered by battery?

Yes, there is a Li-ion battery built-in. Thanks to the low power consumption technology, a full charge lasts for more than 2 to 3 months in our lab test environment (Lab test condition: 10 events per day, 15 seconds video recording per event).

Does it support legacy hardwire power source?

No, it doesn’t. If you need longer battery endurance, suggest that adding a solar battery charger for your doorbell, if only there is sunshine in your doorbell location. You can contact our after-sale service to know where to buy.

Does it work with existing mechanical chime?

No. The doorbell comes with a battery powered wireless chime to notify people when your visitor presses the doorbell button. And our wireless chime is 100% wireless, you can place it almost everywhere you like. The transmission distance in open space is more than 100 meters (328 feet).

How many wireless chimes can be added to the doorbell?

You can add several wireless chimes to work with your video doorbell. And one chime can be paired with upto 8 video doorbells

Does it support customized Motion Detection Zones.

Yes it does.You can customizethe detection zone in the doorbell settings

Does the doorbell support cloud storage?

Your doorbell support local video storage by TF card . And you can also activate the cloud storage service in the App so as to back up video clips into the cloud server. There is a 7-day-free cloud recording trial service.