FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help
Responsible for compliance could void the users authority to operate this equipment.(Example- use only shielded interface cables when connecting to computer or peripheral devices).Any Changes or modifications not expressly approved by the party responsible for compliance could void the user s authority to operate the equipment.This equipment complies with Part 15 of the FCC Rules. Operation is subiect to the following two conditions:
1)This device may not cause harmful interference
2) This device must accept any interference received, includinginterference that may cause undesired operation.
FCC Radiation Exposure Statement:The equipment complies with FCC Radiation exposure limits set forth for uncontrolled environment This equipment should be installed and operated with minimum distance 20cm between the radiator and your body.
(FCC ID: 2AZL7 ZY-G1)
Important Instructions Before Using
1.Although every effort is made to make the manuals complete and accurate, there may be some discrepancies due to product updates.
2.Please insert or pull out the SIM card only when the camera is turned off.
3.In order to ensure that the camera can obtain a good mobile network, it is recommended that you use the SlM card that comes with the camera.
4.The SIM card that comes with the camera only provides 100M of data for free. Please add the data plan in the APP in time after adding the camera successfully.
5.To ensure the continuous use of the camera, please ensure that the SIM card has sufficient data, and continue to supplement the data plan for the SIM card.
6.The camera is specially designed formotion detection and does not support 24/7 video streaming and recording.
7.in order to ensure the battery life, it is not recommended to point the camera directly at the road or in a place with a lot of people/vehicles.
01/what’s in the Box?
02/camera Introduction
- 1.Antenna
- 2.Built-in PIR Sensor
- 3.Working LED
- 4.Charging LED
- 5.Spotlight
- 6.Lens
- 7.Microphone
1.Charging Port
2.Speaker
3.Reset Key
4.Power Key
5.SD Card Clot
6.Nano SIM Clot
| Reset Key | Press and hold RESET for 5 seconds to reset the device (If you have modified the settings, they will revert to the factory default settings) |
| SD Card Slot | Support local SD card storage (up to 128G) |
| SIM Card Slot | Support Nona SIM Card |
| Lens | Support QHD 2K resolution |
| Power Light | Red means charging is in progress Blue means charging is complete |
| Microphone | Capture sound for your videos |
| PIR Sensor | Can detect moving objects up to 10 meters away |
| Working Status Light | Red light continuously on: camera network abnormal Red light flashing : waiting for network connection Red and blue lights flash alternately: SIM card recognition failed Blue light flashing slowly: SIM card recognition is successful |
| Speaker | Two-way voice call sound output |
| Charge Port | Use 5V/2A power supply to charge the camera |
| Thumb Screw | For fixing the camera and the bottom bracket |
| Antenna | 4G dedicated signal antenna |
03/Download and Register APP
Download “ieGeek Cam” APP
Search “ieGeek Cam” in App Store or Google Play, or scan the QR code below to download and install it on your smartphone.
Note: For old users, please update the APP to the latest version
APP Permission Settings
When using the application for the first time, please turn on the following 2 permissions.
- 1.Allow “ieGeek Cam” to access mobile cellular data and WLAN,otherwise you will not be able to add devices.
- 2.Allow “ieGeek Cam” to receive messages, otherwise the phone will not receive alert push notifications when motion detection or audible alerts are triggered.
The above is a screenshot of iOS cell phone operation, Android cell phone permissions open method is basically the same as this method.
4/Register Account
New users must register by email, the concrete steps are as follows
- 1.Click on “Register”;
- 2.Follow the steps to complete your account registration;
- 3.Login.
Tip:
- 1.Please use the correct e-mail.
- 2.Please select the correct country code
- 3.When registering for a new account, please select the region where you are actually located.
05/choice SIM card
A SIM card is included in the camera box, and this card supports the major carrier networks in your country.
It has the advantages of easy installation and use, fast and convenient data recharge, strong network compatibility, strong 4G signal, strong compatibility with the camera, no need to sign an agreement with the operator, etc. It is recommended for you to use it.
Note: This SIM card is only compatible with this camera, please do not insert it into a smartphone or other electronic products.
If you need to configure a SIM card of a local operator, please refer tothe following list to choose:
| Country | Recommended Carriers | 3/4G Frequency Bands Supported by the Camera |
| United States | Verizon/AT&T/T-Mobile | LTE-FDD: B2/B4/B5/B12/B13/B14/B66/B71 WCDMA:B2/B4/B5 |
| Unites Kingdom | O2/Vodafone/EE/Three | LTE-FDD:B1/B3/B5/B7/B8/B20/B28 LTE-TDD:B38/B40 WCDMA:B1/B5/B8 |
| Germany | Telekom/Vodafone/Telefonica | / |
| France | Orange/Bouygue/SFR/Free | / |
| Spain | Vodafone/Orange/Movistar | / |
| Italy | Vodafone/TIM/WindTre/lliad | / |
| Other Countries of Europe | Choose from local mainstream operators | / |
Note:
- The camera does not guarantee the compatibility of the SIM cards of carriers other than those listed in the above list, please choose carefully. The camera only uses data traffic and will not use services such as calls/texts.
- Some cards have a PIN code that you can disable first with your smartphone. Do not insert an IOT or M2M SIM card into your smartphone.
- Cameras purchased in this country cannot be used in other countries because of different 4G frequency bands. Cameras purchased in Europe are supported by the countries marked on the SIM card manual.
06/insert the SIM Card
The SIM card slot is located in the rubber cover under the camera lens, please remove the rubber cover first.
When choosing a Nona SIM cardto insert it into the SIM card slot,please remember: the side with the gold contacts is facing up, ancyou need to push the trimmed notch into the SIM card slot and press it all the way in.
If it is difficult to operate, please use the SIM card tweezers in the camera box.
Note: Do not insert the SIM card into the card slot backwards. It will cause the SIM card not to be recognized, and the SlM card will be stuck inside and cannot be pulled out.
07/Power On the Camera
After inserting the SIM card, press and hold the power button of the camera for 5 seconds until the working indicator on the side of the lens lights up in red, then let go.
Wait for about 30 seconds until the working indicator turns blue light flashing , you will hear the voice prompt “Waiting to connect”, which means the camera has successfully connected to the 4G network,and the next step is to add the camera in the APP.
08/Add the Camera On the Phone
