Indoor Fixed Camera Mini 7Q Quick Guide

image 407

What’s in the box

Consult the checklist below for all components.

image 408

Description

image 409
PowerDC5V±10%
Status lightRed light solids on: the camera network is abnormal
Blinking red light: awaiting WiFi connecting, or currently
connecting (faster blinking)
Blue light solids on: camera running correctly
Blinking blue light: awaiting manual WiFi configuration, or
currently connecting (faster blinking)
MicrophoneCapture sounds for your video
SD card slotSupport local SD Card storage (Max.128G)
ResetPress and hold the ‘RESET’ for 5 seconds to reset the device
(if you have modified settings, they will return to factory
defaults)

Install

Stick the adhesive tape in the middle of camera bottom

image 410

Put the camera on the clean plane

image 411

Connection

Download

CloudEdge is available for both iOS and Android OS. Search the name ‘CloudEdge’ in the App Store or Google Play, or scan the QR code to download the app.

image 339

Set up router

This product only supports 2.4GHz frequency band routers and does not support 5GHz frequency band routers; please set the relevant parameters of the router before WiFi configuration; WiFi passwords do not include special characters such as ~!@#$%^&*(). When the device is configured to use WiFi, the mobile phone and device are as close to the router, which can speed up the configuration of the device.

image 402

Registration process

Step 1 Open the Cloudedge App, click “SlGN UP,” input a valid email address, and click “NEXT.”

image 316

Step 2: Input the verification code and create a password and Nickname that is not less than six digits. Then login.

image 317

Note: Make sure your router, camera, and mobile phone are nearby.

QR Code Configuration

Few notice before adding the device

1. This camera only supports 2.4GHZ wifi routers; please make sure you are using a 2.4GHZ wifi router.

2. Please follow the instructions and make sure the password is inputted correctly.

3. One camera can only be added to one APP account; if the camera has been added to another account already, then it can’t be added to any other account again.

Process

Step 1 Open the CloudEdge App, click ‘+’, and select the type of device to add.

image 318

Step 2 Please confirm the red LED light blinks, select ‘The device has flashed red slowly or you hear a tone’, click ‘Next’. Then input the wireless password, click ‘Next’.

image 404

Step 3 The device is scanning the QR code at a distance of 15~25cm (you can click the ‘operation’ to view the scanning mode). After the device scans successfully, click ‘Hear tone’.

image 405

Step 4 The device is successfully connected to the network. After the configuration is completed, the App automatically adds the successfully scanned device, and return to the device list. The configuration is completed.

image 412

Step 5 Click the play button to complete the preview. (Remind: long press the image to be previewed to remove the device, add device again to reset the device)

image 413

Function

Video flip

Flip your video stream vertically anytime for maximum flexibility.

PIR

When someone passes by, an alarm will be triggered and sent to your phone.

Record

Use an SD card or Open the Cloud-Storage Service to keep recording for every moment.

Day & Night

Powerful night vision means no interruptions, even in complete darkness.

image 341

FAQ

Q: The device cannot be previewed properly?

A: Check whether the network is normal. You can place the camera close to the router, and if not, it is recommended that the device be reset and added again.

Q: Why is it still on the list of devices after resetting?

A: The reset device only resets the network configuration of the camera but cannot change the configuration on the App. Remove the camera, and it must be deleted by the App.

Q: How do you cut the camera network to another router?

A: First, remove and reset the device on the App and then configure the device again by the App.

Q: Why doesn’t the device identify the SD card?

A: it is recommended to plug in an SD card after a power cut. Confirm whether the SD card is normally available and the format is FAT32. And the TFcard can’t be identified when the internet environment is not good.

Q: Why can’t I get the notifications with my cell phone app?

A: Please confirm that the App has been running on the phone and the relevant reminder function has been opened; Message notification and authority confirmation in the mobile phone system has been opened

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top