KAMEP Bell J7 User Manual

image 43

Note: Manual contents are subject to change without notice inaccordance with our polivy of continuous product improvement.

Warranty Service

Thank you for purchasing products from GEREE. We distinguish ourselves byan unrelenting commitment to excellence in terms of our reliable quality, robust design and whole-hearted service. All items you bought from GEREE enjoy lifetime warrany service. Should you haveany questions in using our products, please feel free to contact us by e-mail.A reply email with solution will reach you within 24 hours.

In order to provide you a wonderful experience ,we’d like to remind you the following things:

1,Please install the doorbell on the outermost front of the door, Please try not to install the doorbell in direct sunlight.

2,Please contact us directly if you want to use our cloud service without extra payment or the indoor chime

3,Please feel free to contact us if there is any further problems when using our products.

Your advice or suggestions will be highly appreciated and welcomed.

Meet the doorbell

image 44

Doorbell comes with a 4500mAh rechargeable Li-ion battery

Meet the chime(Optional)

image 45

Chime can be powered either by AA batteries or a Micro USB compatible phone charger

Please mind the battery polarities when installing

Charge your doorbell

Prior to the doorbell installation, please charge up your doorbell for about 8-10 hours till the charging LED turns BLUE from RED

image 32

Compatible charger ( not provided ):USB compatible mobile phone charger (DG-5V 1A-2A).

image 47

App download

Search ‘Cloudot’ in the App stores or scan below QRcodes to download the App!

image 34

Set up doorbell

Press your doorbell to activate, and you will see the LED indicator flashes red (once per second). lf not, press and hold reset button for 5 seconds to restore factory defaults.

image 48

Start setting up your doorbell following the in-app instructions.

Tips

Please operate the setup near your Wi-Fi router.

Make sure your phone is connecting to a 2.4GHz Wi-Fi.

Make sure the doorbell is turned on, and its indicator LED is flashing red. If not, press and hold RESET for 5 seconds.

Ensure the Wi-Fi signalis good, and the Wi-Fi password iscorrect.

image 36

Pair with your indoor chime(Optional)

Click the SETTING button on the chime, and the chime will be in pairing mode for 20 seconds, with its red LED flashing.

image 49

Press the doorbell button to send a pairing signal, and your chime will sound to react, together with its blue LED flashing.Chime pairing succeeds.

image 50

Chime settings.

Ringtone selection.

Click to change ringtone (4 ringtones available)

Volume control button.

Click to control volume:

level 1: 110 dB; level 2:100 dB
level 3: 90 dB; level 4: 80 dB

Settings.

Click to enter/quit pairing mode;

Press & hold settings for 5 seconds to restorefactory defaults

image 51

Note:
The indoor chime may NOT be included in the package

Install Your doorbell

Select location for your doorbell.

image 39

(OPTIONAL]Install at an angle

You can purchase the following angled brackets so as to point your doorbell to a specific view angle

image 52

Standard installation.

image 53

Tamper Alarm

Anti-theft Tamper Alarm.You can also enable the anti-theft alarm in doorbell settings.

image 54

Tamper Alarm On

With tamper alarm on, your doorbell detects disassem-bly by the trigger on its back, and then a 30-second siren alarm will be triggered. Meantime, video recording get started, and alarm notification will be pushed to the owner’s APP account

Tamper Alarm Off

You can disable the tamper alarm in doorbell settings.and detach the doorbell without any alarm for battery recharge or regular maintenance.

Trouble Shooting

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top