Packing List
Product Appearance
Power Button | Long press for 3s to turn on/off the camera; Long press for 20s to reset the camera |
Reset Button | Long press for 5s until hearing the”cuckoo” sound to reset the camera |
Micro-SD Card Slot | support locally SD card storage(up to 128G) |
Charging Indicator | Red means charging; Blue meansfully charged. |
Solid on red | network is abnormal(pls reset thecamera and connect to the network again) |
Slow flickering red | Awaiting Wi-Fi connection and start adding devices |
Fast flickering red | Wi-Fi connecting |
Solid on blue | Wi-Fi connected successfully, the camera running normally |
APP Download
Method 1: Search “CloudEdge” in App Store(ios)or Google Play(Android).
Method 2: Scan the QR Code to directly download the app.
Please use your phones camera or Google Chrome to scan the QR code.
ATTENTION: There will be a risk of being scammed if you use other methods to scan.
Note: Please turn on 2 below permissions while using this APP for the first time.
- Allow the app to access mobile cellular data and wireless LAN, or it will failto add an IP camera.
- Allow the app to receive pushed notifications, or the phone will not receivealarm push when motion detection or audible alarms triggered.
Account Registration
Step 1: Open the app, click “Sign up now” to registerIf you already have an account, click “Log In” to log in.
Step 2: Choose your current country(Different registered regions can not share the camera)
Step 3: Input a legal Email address, then enter the nickname and password.
Add the Camera to the App
Before adding:
1) Make sure the camera turns on and in slow flickering red light, and the Wi-Fi you want to connect is 2.4GHz.
2) Put the camera and smart phone 1-1.6ft(30-50cm) away from the router to set Wi-Fi.
3) The camera supports both cloud and SD card storages. If you want to insert a Micro SD card, please insert it before powering on the camera.Or the SD card cannot be detected.
Failed to connect to Wi-Fi?
- Make sure the Wi-Fi name and password are correct and it is 2.4GHz,not 5GHz. You could forget your Wi-Fi on your mobile phone and re-enter the password to check whether the password is correct.
- Make sure the Wi-Fi works. You could try to connect the Wi-Fi to yourphone, if you could normally surf the lnternet, it means that the Wi-Fi works.
- Put the camera and smart phone as close as to the router.
- Check the number of devices your router connected. Once the number ofdevices that your router connected exceeds its max limitation, other devices cannot connect to the router.
- Make sure the QR code on the phone screen is normal and the distancebetween the phone and the camera lens is 10-15cm(0.33-0.5ft) during thescanning process.
- After checking the above information, if the camera cannot connect tothe Wi-Fi, please try to re-download the APP, reset the camera and restart the router, and then add the camera again.
- If you tried all steps, but still failed, please send your order id and problem to [email protected].
Install the Camera
For more details, please tap the camera setting>Installation Guide.
You can place the camera on a shelf or other surfaces to use, or you caninstall it on a wall to use.
(1) Select a good spot for your camera
Select a good spot for your camera, please install the camera in a position where its view is not blocked and ensure that it is within the coverage of the Wi-Fi network. The PIR infrared sensor is more sensitive to movements across the camera’s field of view than movements toward oraway from the camera.
(2) Install the bracket
1) Screw fixing:
Use the drilling tool to punch holes on the wall according to the hole distance of the base. It is recommended to mark the holes on the wallwith a pencil before drilling. Screw the expansion nut into the holes on the wall, and then connect the bracket to the expansion nut with screwsto complete the fixing.
2) Fix the camera
Align the bracket screw with the screw hole on the bottom of the camera, and then rotate it to the tightened state.
3)Adjust the angle
Adjust the camera to an appropriate angle, the best angle is about 15 degrees downward,and then tighten the base by rotating it in clockwise direction to fix the angle.
Important Notes on Reducing False Alarms
- Do not face the camera towards any objects with bright lights, includingsunshine, bright lamp lights, etc.
- Do not place the camera near any outlets, including the air conditionervents, humidifier outlets, the heat transfer vents of projectors, etc.
- Do not install the camera at places with strong wind.
- Do not face the camera towards a mirror.5. Keep the camera at least 1 meter away from any wireless devices.
including Wi-Fi routers and phones in order to avoid wireless interference.
Charge the Camera
The app will remind you to charge the camera when the battery is low.Please use a Micro USB cable to plug into the 5V/1.5A adapter to charge it.It also supports connecting to a solar panel for charging. Red light means charging; Blue light means fully charged.
Step 1: Open the entire rectangularrubber cover on the bottom of the camera.
Step 2: open the small oval rubber cover, let the charging cable connectorpass through the cover then plug it into the Micro USB port.
Step 3: Cover the entire rectangular rubber cover.
Note: Our camera is IP65 waterproof. But it will not bewaterproof if the rubber cover opened.
Share the Camera
When you need to view the camera with other family members or friends you can use this function. Only the administrator whose account is bound with the camera for the first time can share and set the device.Other members can only view the live or playback videos.
NOTE:You can not share account with different registered regions.
Step 1: Click “Device Share” on setting page.
Step 2: Click “scan QR Code”
Step 3: Scan the QR code for the mobile you want to add and you will receive the confirmation notification after success. The sharing will be completed after your agreement. If you choose “enter aocount” you could search the account you would like to add.
FAQS
For more detailed FAQs, please log in to the app
tap“Me”>“Help”>“Battery Camera”
24/7 customer service email: [email protected]
Product Specification
Item | Specification |
Camera lens | Field of view :103° |
Battery capacity | 5200mAh |
Charging interface | Micro-USB |
Wi-Fi requirement | 2.4GHz Wi-Fi(IEEE802.11b/g/n) |
Adapter requirement | 5V/2A |
Waterproof rating | IP65 |
Camera size(L W H) | 89.9mm57.7mm47.9mm |
Storage media | Micro SD card (Up to 128GB) |
PIR detection distance | Approx. 33 feet |
Infrared night vision distance | Approx. 50 feet |