MANUEL D'UTILISATION DE LA CAMÉRA DE SÉCURITÉ COOAU ZS-GQ3

1. Soutien après-vente

Thanks for purchasing our COOAU battery WlFl security camera. We provided 12 months warranty. If you have any problems or suggestions, please feel free to contact us by Amazon message or send e-mails to our official mailbox [email protected]. The best service will be offered to you.

Remarque :

The camera only supports 2.4GHz WlFl; it doesn’t support 5GHz WIFI.

Please ensure that the Wi-Fi signal strength is to be over than85%; if the camera is far away from the signal source, it won’t be connected successfully for the first time.

If your router is connected to too many devices, the camera will fail to connect to Wi-Fi because of the lP address conflict.

Cette caméra sans fil ne prend pas en charge le navigateur et le logiciel PC.

Cette caméra sans fil prend en charge l'enregistrement d'événements lorsque le Wi-Fi est déconnecté.

La lecture vidéo ne fonctionne que dans l'APP CloudEdge. Elle ne prend pas en charge les lecteurs tiers.

Manually snapshot and recording files are saved in mobile Events snapshot files are saved in Cloud. Events recording files are saved on a micro SD card.

It will consume the battery’s power if you watch live footage or recorded videos from the SD card.

2. Liste de colisage

3. Présentation du produit

4. APP installation and Account Registration

4.1 Télécharger l'application "CloudEdge

Method 1: Download ‘CloudEdge’APP from the APP Store (iOS) or Google Play (Android);

Method 2: Scan’CloudEdge’APP QR code to download it.

Conseils : Veuillez activer les deux permissions ci-dessous lors de la première utilisation de cette application.

1. Allow the ‘CloudEdge’ APp to access mobile cellular data and wireless LAN, or it will fail to add an IP camera.

2. Allow the ‘CloudEdge’ APP to receive pushed messages, or the phone will not receive an alarm push when a motion detection or audible alarm is triggered.

4.2 Enregistrement du compte

Les nouveaux utilisateurs doivent s'inscrire par courrier électronique. Les étapes concrètes sont les suivantes :

1)Click”Register”.

2)Follow the steps to complete the registration of the account;

3) Connectez-vous.

Remarque :

When registering a new account, please choose the region which you are actually in. (Different registered regions can’t share the camera.)

Please choose to register by e-mail.

5. Comment ajouter une caméra à l'APP

5.1 Installer la carte Micro SD

Please insert a Micro SD card to record videos and playback when motion is detected. (Micro ··SD card is not included; the camera supports up to 128GB Micro SD card)

Note: Please insert the Micro SD card before powering it on; otherwise, the SD card can not be detected.

5.2 Mise sous tension de l'appareil

Press and hold on the power button for 5 seconds to turn on the camera (fit can’t be powered on; please plug in a DC 5V 2A power adapter to charge the camera for 15 minutes first). An indicator with a red light blinking slowly means the camera has started successfully.

Note: DC 5V 2A power adapter is not included in the packing list

5.3 Connecter l'appareil photo

Note: Put the camera and smartphone 1 to 3 feet (30 to 100 cm away from the router) away from the router to set Wi-Fi.

Note: The camera only supports 2.4GHz WilFl; it doesn’t support 5GHz WIFI.

Étapes de la connexion Wi-Fi :

(1)Before connecting the camera, please press and hold the reset button for 5 seconds to reset or restore the factory. When you hear the sound of “Boogu,” that means resetting successfully.

(2) Run CloudEdge App, click“+” and select “Battery Camera’According to the guide on APP, please ensure the camera wasactivated. (The LED indicator light is turning red and flickering slowly)

(3) After entering the ‘Add Battery Camera’ interface, click ‘Next; when entering the next interface, click ‘Next’ again;

(4)Select 2.4GHz Wi-Fi SSlD, input the Wi-Fi password, and then click ok

(5)After entering the operation interface above, please click“Next,” and you will see the “Scan QR Code” interface.

(6) Put the QR code in front of the camera lens about 15cm. The device lens is aimed at the QR code on the phone screen at a distance of 15cm. After the device recognizes the QR code, the camera will make a sound called ‘Boogu.’ After hearing it, please click next.

(7)Then, the camera will start connecting to the Network. After the connection is finished, it will skip to the ‘Device Found’ page; you can edit the camera name, click ‘Done,’ and then go to your device list and start viewing videos.

6. Introduction à la fonction

6.1 Introduction à l'interface APP

Receive Alert Notifications: Open it to receive the notifications.

Device Share: Share the camera with the users who are registered in the same region.

Device Information: Check to view ‘Network Name，” Signal Strength，” Virtual ID，’ ‘IP，” Mac Address,’ and ‘Timezone.’

Installation Guide: Choose a proper place to install a camera that has high wifi sigh strength.

Basic Function:

• (1)Network Indicator: On/off;
• (2) Speaker Volume: 0-100 for you to choose;
• (3) Open it, and the picture will be rotated 180°
• (4) Night Vision: Choose the night vision mode (Automatic/On/Off);
• (5) Power Management: Display remaining battery capacity information and estimated time available.

Power Saving Settings: Setting the shooting interval and maximum shooting time.

Motion Detection: ‘Motion Detection’ on/off,’ Alarm sensitivity adjustment'(Low/High), ‘Alarm Interval'(set alarm interval), ‘Alarm only when people appear’ on/off, ‘Alarm Plan'(set the alarm time).

Recording Management: Setting recording time (20 seconds, 40 seconds,1 minute); Display the total capacity and remaining capacity of the SD card; support one-click format SD card in the CloudEdge app).

Cloud Storage Service: Free 7-day cloud storage experience.

Device Version: Check the current and the newest versions and support a one-click upgrade.

Device Share: Share your cameras with other users.

Album: View pictures and videos from recording and screenshot manually; delete pictures and videos batchly.

FAQ: Common problems and solutions.

Online Help: online technical support.

Setting

• In-App Alert Sound: on/off
• Clear Cache: Clear the cache in the APP.
• Deactivate Account: Permanently disabled on

App Version: The current APP version

6.2 Partage d'utilisateurs P2P

(1)Please sign up for a new account on your friend’s phone. (use the same steps as you created your account; please choose the same country)

(2) Access your APP ‘Me,’ click ‘Device Share’ to choose the camera which you want to share, click ‘Add,’ then scan or input your friend’s account to add his account.

(3) Accept the friend request on your friend’s phone; you can see it from ‘Messages – System Messages’ on your friend’s phone.

(4) Refresh the APP’s interface on your friend’s phone to view the camera.

(5)Access your friend’s phone camera setting to open ‘Receive Notifications.’

Note: When you have a sharing, please make sure the APP account is registered in the same regions. Otherwise, you won’t share successfully.

6.3 Paramètres d'alerte

PIR’Motion Detection is on by default, and the default sensitivity is ‘Low,’ but it is adjustable.

Alert settings steps: ‘My Device’ -> ‘Motion Detection.’

Tips: The detecting distance is 4 meters (13ft)

Note: Higher sensitivity offers a longer detecting distance, but it would lead to more false alarms. You are advised to set up the sensitivity level to ‘Low’ when you install the camera outdoors.

6.4 Notification push et lecture des alarmes

Wireless camera with PIR sensor is not designed for 7 X 24 all-day recording but aims at pushing alarm message notification to an app and recording video to Micro SD card or capturing a screenshot to Alicloud (Need to pay) when PIR sensor detected body motion events. Then, you can playback the motion videos wherever you are via the CloudEdge APP.

When PIR is triggered, camera and system actions:

• 1. Alarm Sound in APP (Please turn on permission for CloudEdge APP notification in mobile setting and turn the mobile volume on)
• 2. Alarm Message Notification (Please enable CloudEdge APP notification in a mobile setting)
• 3. Alarm snapshot and video will be recorded on a Micro SD card(Please insert a micro SD card) or Alicloud (Need to pay)

7. Gestion de la batterie

The camera has built-in batteries, which can be used for 4-6 months in theory, assuming the camera wakes up ten times per day and watches 10 minutes of video.

(Note: The life of the battery depends on the time the camera wakes up. The more the times of wake-up, the faster the battery capacity is consumed.)

• If the battery capacity is less than 20%, the app will send an alarm message to remind you to charge in time.
• You can charge the camera with a DC 5V 2A power adapter.
• If your battery capacity is consumed too fast, it is probably because the camera is woken up too frequently. It is recommended to lower the ‘Motion Detection’ sensitivity or turn it off occasionally.

8. Installation de la caméra

You can put it on any flat place: Table, Chair, Floor, etc.

Comment l'installer avec un support mural :

Fix the bracket to the wall with screws and wall anchors by using a drill or a screwdriver, and then rotate the camera into the bracket. You can adjust the angle of the camera by loosening and tightening the rotary knob on the bracket.

Conseils :

• Veillez à ce que le mur ou la surface où vous souhaitez installer la caméra soit plat(e). Pour faciliter l'installation, il est conseillé d'utiliser une perceuse. Les murs en béton peuvent ne pas convenir à l'installation.
• When installing the camera, it’s not suggested to make the PIR sensor vertically face the moving object. Otherwise, it may not detect the motion events. It is suggested that the angle between the PIR sensor and the detected object be larger than 10 degrees.

9. Comment réduire les fausses alarmes

• To reduce false alarms, please note the following:
• Do not install the camera in a position facing any objects with bright lights, including sunshine, bright lamp lights, etc.
• Do not place the camera too close to a place where there are frequently moving vehicles. Based on numerous tests, the recommended distance between the camera and the vehicle is 15 meters(55 ft).
• Stay away from the outlets, including air conditioner vents, humidifier outlets, the heat transfer vents of the projectors, etc.
• Do not let the camera face the mirror.
• Keep the camera at least 1 meter away from any wireless devices in order to avoid wireless interference, including Wi-Fi routers and phones.

10. Résolution des problèmes

11. FAQ

1. Comment supprimer les photos et les vidéos ?

Select’Me’ –‘Pictures & Videos’ — Selected – Delete

2. Pendant combien de temps dois-je charger la batterie intégrée pour obtenir une charge complète ?

The wireless camera charger supports a DC 5V 2A plug.

Please charge it more than 15 hours before you use it; it needs to be FULLY charged before first use.

10400mAh fully charged by 5V 2A DC power adapter: about 8 hours.

3. Comment parler à la caméra et écouter la caméra ?

Hold the intercom key to talk to, and enable the audio key on. Then, you can listen to the camera.

Step 1: Enable audio option

Step 2: Hold ‘Intercom’ key to talk

4. Comment charger la caméra de sécurité ?

• (1) Remove the waterproof plug;
• (2) Align the USB icon on the camera to guarantee that the power cable is inserted into the USB port.
• (3) Use a 5V 2A power supply and connect with the power cable. Then， plug it into the socket.

5. Quel est l'effet du chaud ou du froid sur l'autonomie de la batterie ?

It handles temperatures ranging between- 13°F and 140°F (- 25 °C to 60 °C).

Outside temperature below minus 20 degrees may affect the performance of the battery which may affect the camera work.

6. Quelle est la différence entre les lignes rouge et verte dans l'affichage de l'historique ?

It will record 30 seconds when the camera detects motion; if the motion lasts up to 30 seconds, it will show red lines in the history display; if the motion lasts up to 10 seconds, it will show 10 seconds red lines, and 20 seconds green lines in the history display.

7. Quelle est la durée de vie de la batterie ?

It depends on how much traffic you have.

Besides, it will consume the batteries’ power if you watch live footage or recorded videos from the SD card.

The camera has a built-in battery, which can be used for 4-6 months in theory, assuming the camera wakes up ten times per day and watches 10 minutes of video. (Note: The life of the battery depends on the time the camera wakes up. The more the times of wake-up, the faster the battery capacity is consumed.)

If the battery capacity is less than 20%, the app will send an alarm message to remind you to charge in time.