- Thanks for purchasing and using our product. Please read this quick start guide before using it, and keep it for future reference.
- Manual contents are subject to change without notice in accordance with our policy of continuous product improvement.
WHATSIN THE BOX
MEET THE DOORBELL
- Camera(2K)
- Microphone
- Doorbell Button
- LED Indicator
- Speakers
- Hardwire Terminals
- MicroSD Slot
- Security Screw Hole
- Micro USB Port
- Reset Hole
- Wall Mount Bracket
- Mounting Screw Holes
- Security Screw
- 20°Angle Mount(Optional)
- Doorbell Mounting Holes
- Wall Mounting Screw Holes
MEET THE CHIME
SET UP YOUR DOORBELL
1. Attach the wires from the provided power adapter to the terminals on the rear of your doorbell, and tighten the terminal screws with screwdriver. Each wire can be connected to each power terminal.
The cable order doesn’t matter.
2. Plug the adapter into your AC outlet. Install the doorbell within 30 feet of your 2.4GHz WiFi router.
It is suggested that you test your doorbell prior to physical installation.
3. Download and install the ‘CloudEdge’ app on your smartphone. Launch the App and register an account with your mobile phone number or email ID.
4. Start the Wi-Fi configuration following the in-app instructions or referring to the below tutorial steps
5. LED indicator explanation:
LIVE VIEW
Tap(play)on the Home page devices to watch the live view from your doorbell
- Quit live viewing
- Setting menu
- Date & time watermark
- Volume on/off
- FHD/HD/SD switch
- Full-screen display
- Stream bit rate
- Wi-Fi signal status
- Screenshot button
- Speak to the scene
- Record on the phone
- Body detection on/off
- Notification history
- Cloud storage service
NOTE:Live viewing will not trigger device recording at Event recording mode.
SETTINGS
- Back to live view
- Edit device name
- Receive/block motion alarms
- Share the device with other users
- Device information
- Basic function:
- 1. LED Indicator on/off
- 2. Night vision on/off/auto
- 3. Human detection frame on/off
- 4. Wireless chime settings
- Alarm setting:
- 1. Motion detection on/off
- 2. Sensitivity Setting
- 3. Alarm interval Setting
- 4. Alert only when people appear(on/off)
- 5. Alarm schedule
- 6. Motion detection area setting
- SD Card Setting
- Cloud Storage Service
- Work with Amazon Echo
- Work with Google Home
- Advanced Features: Onvif on/off
- Device Version
- Delete Device
RECORDING
Your doorbell comes with Event recording by default. It will record visitor calls and motion detection events. You can also enable Full-day recording in the Settings -> SD Card.
HISTORY PLAYBACK
Tap History to play the videos recorded on the MicroSD card
Time Line:
Slide the timeline to the left or right to locate video recordings according to the time period.
The green bar stands for video length.
The yellow dot stands for the alarm point when someone has pressed the doorbell button.
The red dot stands for the alarm point when a motion has been detected.
Calendar:
Check video history by date. The numbers in green stand for the dates that have video recordings.
Screenshot:
Tap to capture a photo and save it to Me -> Pictures & Videos, Where you can share it with others.
Record:
Tap to start recording a video, tap again to end, and save to Me -> Pictures & Videos, Where you share the video clips with others.
Alarm:
Tap the listed alarm records to locate and display each alarm video quickly. It stands for visitor call events and motion detection recordings.
Timeline Zoom:
Slide upward to zoom in on the timeline and downward to zoom out.
CONNECT THE CHIME
Supply power to the chime
The chime can be powered by a compatible power source(DC5V 1A) or by the USB port on your computer.
Click reset button
Click on RESET only once, and you will see the chime indicator flashing blue, indicating that the chime is in pairing mode.
Press the doorbell button.
Press the doorbell button, and the chime will sound. If pairing is successful, the indicator on the chime will be in solid blue.
Chime settings
You can enter into the chime setting page following the below setting steps so as to mute the Chime Reminder. Select ringtones. adjust chime volume or unbind the connection with the doorbell.
NOTE:
1. Your doorbell communicates with the chime via Radio Frequency but not WiFi.
2. You can assign different chimes as needed.
3. Press and hold the RESET button on the chime for 5 seconds till the indicator flashes blue three times, and you can also release the connection between the chime and its connected doorbell.
INSTALLATION
The video doorbell works with a 12V DC power source (power adapter provided), as well as an existing 12V~24V AC hardwire power source. t enables you to make use of your legacy doorbell wiring for retrofit installation.
NOTE:
For retrofit installation, you need to bypass your indoor mechanical chime so as to provide sufficient power for the new video doorbell.
RETRO-FIT INSTALLATION (OPTIONAL)
To replace your existing doorbell and mechanical chime, please follow below installation steps:
1. Shut off the master circuit breaker in your house.
2. Bypass your indoor chime with a provided jumper.
In most cases, the existing doorbell circuit looks similar to the image below. Remove the cover of the indoor chime and loosen the “FRONT and “TRANS” terminal screws. Use the provided jumper to connect the two terminals. And replace the chime cover.
Select a location for your video doorbell.
Determine the mounting position of the doorbell. Check if you can reuse the existing holes on the wall. Do not drill new holes to mount your video doorbell.
It is suggested to mount the doorbell at least 4 feet (120 cm) above the ground for optimal angle of view and best motion detection performance.
Replace your existing doorbell.
Restore power at the breaker, and your doorbell is ready for use.
HARDWIRE INSTALLATION
Hardwire your doorbell with the provided DC12V power adapter.
