Wired Doorbell Bell 5S Quick Guide

image 501

What’s in the box

Consult the checklist below for all components.

image 502

Description

image 503
PowerAC 12~24V
Status lightSolid red light on: the camera is turning on or malfunctional
Blinking red light: awaiting WiFi connection (slowly blinking)
connecting the WiFi (quickly blinking)
Blinking blue light: currently connecting
Solid blue light on: the camera runs correctly
Doorbell buttonPress the button to activate the doorbell
MicrophoneCaptures sound for your video
SD card slotSupport local SD Card storage (Max.128G)
ResetPress and hold on for 5 seconds with pin to reset the
doorbell

Mechanical Chime Installation

First, turn off the power breaker at your fuse box for your existing doorbell and mechanical chime. Ring your doorbell again to confirm it is now off.

image 504

Find your mechanical chime, which is a rectangular box that produces the sound when your doorbell is pressed. It may(or may not)be mounted immediately inside your FRONT door. And remove the cover.

image 505

Slightly unscrew both screw terminals and one hook from the Chime Kit under each screw(It does not matter which color wire from the Chime Kit connects to which screw).

image 506

Locate the Chime Kit included in the smart doorbell’s packaging and the terminals on the inside of the chime. Connect one of the Chime Kit’s prongs to the transformer terminal(usually labeled TRANS, T, AC, or 0).
Connect the other prong to the chime’s front terminal (usually labeled FRONT, F1, or C1). Either prong on the Chime Kit can be connected to either of the terminals on the chime.

image 507

Using the included double-sided tape, affix the Chime Kit to your chime wherever there is space and replace the cover. Be careful not to interfere with any of the chime’s moving parts.

image 508

Ensure that the Chime Kit and wires DO NOT interfere with the mechanical parts of the chime. Mount on the outside of the chime if there is not enough room to mount inside. And replace your chime’s cover.

Installation

Mode 1 Doorbell General Installation

image 509

Mode 2 Angle Wall Mount + Bracket + Doorbell Installation

image 510

Turn the doorbell power back on at the fuse box. The light on the doorbell button should turn on and, after a few minutes, become red slowly.

image 511
image 512

Connection

Download

CloudEdge is available for both iOS and Android OS. Search the name ‘CloudEdge’ in the App Store or Google Play, or scan the QR code to download the app.

image 339

Set up router

This product only supports 2.4GHz frequency band routers and does not support 5GHz frequency band routers; please set the relevant parameters of the router before WiFi configuration; WiFi passwords do not include special characters such as ~!@#$%^&*(). When the device is configured to use WiFi, the mobile phone and device are as close to the router as possible, which can speed up the configuration of the device.

image 402

Registration process

Step 1 Open the Cloudedge App, click “SlGN UP,” input a valid email address, and click “NEXT.”

image 316

Step 2: Input the verification code and create a password and Nickname that is not less than six digits. Then login.

image 317

Note: Make sure your router, camera, and mobile phone are nearby.

QR Code Configuration

Few notice before adding the device

1. This camera only supports 2.4GHZ wifi routers; please make sure you are using a 2.4GHZ wifi router.

2. Please follow the instructions and make sure the password is inputted correctly.

3. One camera can only be added to one APP account; if the camera has been added to another account already, then it can’t be added to any other account again.

Process

Step 1 Open the CloudEdge App, click ‘+,’ and select the type of device to add.

image 318

Step 2 Please confirm the red LED light blinks, select ‘The device has flashed red slowly, or you hear a tone,’ and click ‘Next.’ Then, input the wireless password and click ‘Next.’

image 404

Step 3 The device is scanning the QR code at a distance of 15~25cm (you can click the ‘operation’ to view the scanning mode). After the device scans successfully, click ‘Hear tone.’

image 405

Step 4 The device is successfully connected to the network. After the configuration is completed, the app automatically adds the successfully scanned device and returns it to the device list. The configuration is completed.

image 412

Step 5 Click the play button to complete the preview. (Remind: long press the image to be previewed to remove the device, and add the device again to reset the device)

image 413

Function

Full-duplex audio

When the visitor pushes the doorbell button, you will get a call. You can see and hear the visitor in your App from the doorbell if you answer.

Motion detection

Motion sensors will notify you when movement is detected.

Shared device

The doorbell device can be shared with friends, and friends can also preview online. There is no limit to the number of sharing devices, but only six accounts are supported for online preview at the same time.

Record

Use an SD card or Open the Cloud-Storage Service to keep recording for every moment.

Day & Night

Powerful night vision means no interruptions, even in complete darkness.

image 341

FAQ

Q: In the network process, the process bar is always not 100%; add failure?

A: This camera only supports a 2.4GHz WiFi router; please make sure you are using a 2.4GHz WiFi router. And confirm the WiFi password again.

Q: Are repeated addition failures?

A: After adding a failure, it is recommended to restart the device or power off and then try to add again.

Q: The device cannot be previewed properly?

A: Check whether the network is normal. You can place the camera close to the router, and if not, it is recommended that the device be reset and added again.

Q: How do you cut the camera network to another router?

A: First, remove and reset the device on the App and then configure the device again by the App.

Q: Why can’t I get the notifications with my cell phone App?

A: Please confirm that the App has been running on the phone and the relevant reminder function has been opened; Message notification and authority confirmation in the mobile phone system have been opened.

Q: Why doesn’t the device identify the SD card?

A: It is recommended to plug in an SD card after a power cut. Confirm whether the SD card is normally available and the format is FAT32. And the TF card can’t be identified when the internet environment is not good.

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top