KAMEP Bell J5 User Manual

Thanks for purchasing and using our product. Please read this quick start guide before using, and keep it for future reference.
Manual contents are subject to change without notice in accordance with our policy of continuous product improvement.

WHATSIN THE BOX

MEET THE DOORBELL

Camera(2K)
マイク
ドアベルボタン
LEDインジケーター
スピーカー
Hardwire Terminals
MicroSD Slot
Security Screw Hole
マイクロUSBポート
Reset Hole
Wall Mount Bracket
Mounting Screw Holes
Security Screw
20°Angle Mount(Optional)
Doorbell Mounting Holes
Wall Mounting Screw Holes

MEET THE CHIME

SET UP YOUR DOORBELL

1.Attach the wires from the provided power adapter to the terminals on the rear of your doorbel, and tighten the terminal screws with screwdriver. Each wire can be connected to each power termina.

The cable order doesn’t matter.

2.Plug the adapter to your AC outlet. lnstall the doorbell within 30 feet of your 2.4GHz WiFi router.

It is suggested to test your doorbell prior to physical installation.

3.Download and install the ‘CloudEdge’ App to your smartphone.Launch the App and register an account with your mobile phone number or email ID.

4.Start the Wi-Fi configuration following the in-App instructions or referring to below tutorial steps

5.LED indicator explanation:

LIVE VIEW

Tap(play)on the Home page devices to watch live view from your doorbell

Quit live viewing
Setting menu
Date & time watermark
Volume on/off
FHD/HD/SD switch
Full screen display
Stream bit rate
Wi-Fi signal status
スクリーンショットボタン
Speak to the scene
Record on the phone
Body detection on/off
Notification history
Cloud storage service

NOTE:Live viewing will not trigger device recording at Event recording mode.

SETTINGS

Back to live view
Edit device name
Receive/block motion alarms
Share device with other users
Device information
Basic function:
- 1.LED Indicator on/off
- 2.Night vision on/off/auto
- 3.Human detection frame on/off
- 4.Wireless chime settings
Alarm setting:
- 1.Motion detection on/off
- 2.Sensitivity Setting
- 3.Alarm interval Setting
- 4.Alert only when people appear(on/off)
- 5.Alarm schedule
- 6.Motion detection area setting
SD Card Setting
Cloud Storage Service
Work with Amazon Echo
Work with Google Home
Advanced Features: Onvif on/off
Device Version
Delete Device

RECORDING

Your doorbell comes with Event recording by default. lt will record visitor calls and motion detection events. You can also enable Full day recording in the Settings -> SD Card.

HISTORY PLAYBACK

Tap History to play the videos recorded in the MicroSD card

Time Line:

Slide the timeline to the left or right to locate video recordings according to time period.

The green bar stands for video length.

The yellow dot stands for the alarm point when someonehas pressed the doorbell button.

The red dot stands for the alarm point when a motion has been detected.

Calendar:

Check video history by date. The numbers in green stand for the dates that have video recordings.

Screenshot:

Tap to capture a photo and save to Me -> Pictures & Videos, Where you can share it to others.

Record:

Tap to start recording a video, tap again to end and save to Me -> Pictures & Videos, Where you sharethe video clips to others.

Alarm:

Tap the listed alarm records to quickly locate and display each alarm video. Stands for visitor call events;stands for motion detection recordings.

Timeline Zoom:

Slide upward to zoom in the timeline and downward to zoom out.

CONNECT THE CHIME

Supply power to the chime

The chime can be powered by USB compatible power source(DC5V 1A), or by the USB port on your computer.

Click reset button

Click on RESET only once, and you will see the chime indicator flashing blue, indicating that the chime is in pairing mode.

Press the doorbell button

Press the doorbell button, and the chime will sound.lf pairing is successful, the indicator on the chime will be in solid blue.

Chime settings

You can enter into the chime setting page following below setting steps, so as to mute the Chime Reminder. select rinatones. adiust chime volume or unbind the connection with doorbel.

注：

1.Your doorbell communicates with the chime via Radio Frequency, but not WiFi.

2.You can assign different chimes as needed.

3.Press and hold RESET button on the chime for 5 seconds till the indicator flashes blue 3 times, and you can also release the connection between the chime and its connected doorbell.

INSTALLATION

The video doorbell works with 12V DC power source (power adapter provided), as well as an existing 12V~24V AC hardwire power source. t enables vou to make use of your legacy doorbell wiring for retro-fit installation.

注：

For retro-fit installation, you need to bypass your indoor mechanical chime so as to provide sufficient power for the new video doorbell.

RETRO-FIT INSTALLATION (OPTIONAL)

To replace vour existing doorbell and mechanica chime, please follow below installation steps:

1.Shut off the master circuit breaker in your house.

2.Bypass your indoor chime with provided jumper.

ln most cases, the existing doorbell circuit looks similar to the image below. Remove the cover of the indoor chime and loosen the “FRONT and “TRANS” terminal screws. Use the provided jumper to connect the two terminals.and replace the chime cover.

Select alocation for your video doorbell.

Determine the mounting position of the doorbell. Check if you can reuse the existing holes on the wall. lf not drill new holes to mount your video doorbell.

最適な画角と最良の動体検知性能を得るために、ドアベルは地上から少なくとも4フィート（120cm）の高さに取り付けることをお勧めします。

Replace your existing doorbell.

Restore power at the breaker, and your doorbell is ready for use.

HARDWIRE INSTALLATION

Hardwire your doorbell with the provided DC12V power adapter.

TROUBLE SHOOTING

Is the video doorbell powered by battery?

No, this video doorbell reuiquires constant hardwire power supply. Compared to battery powered doorbells, this wired video doorbell has more advanced features, like supporting full day recording, no delay quick response to visitor calls, and smaller in dimension, fitting into narrow door frames.

How to connect the hardwire to the doorbell? Does the cable order matter?

Your doorbell works with both DC 12V and AC 12V – 24V hardwire power source. There are 2 terminal screws on the rear of your doobrel, and you can connect each wire to each power terminal screw. The cable order doesn’t matter.

I found a Micro USB port near the Micro SD Slot, what’s it for?

You can power up the doorbell by the Micro USB port. using an USB compatible charcer and cable. it is designed mainly for product testing in the factory.

What’s the Wi-Fi range of the video doorbell?

The video doorbell works with any 2.4GHz wireless Wi-Fi router, mesh system or modems. ln outfield test, it works well in most 3000saft houses The Wi-Fi range may vary because of different WiFi transmit power, transmission distance and wall blocks in between.

I installed my video doorbell, but the video or audio quality is poor

In live view interface, WiFi status will be listed. lt is suggested to ensure the Wi-Fi status be more than 70%, so as to get your doorbell work as expected. If you think your problem is caused by low Wi-Fi signal strength, try moving your Wi-Fi router closer, or add one Wi-Fi Booster to extend your Wi-Fi range.

Does the video doorbell work with existing indoor mechanical chime?

No. The doorbell comes with an USB compatible wireless chime to notify people when your vistor presses the doorbell button, if you have an existing indoor chime, please use the provided jumper to bypass the existing chime, so as to provide sufficient power to the new video doorbell.

How many wireless chimes can be paired with one video doorbell?

You can add as many wireless chimes as your wish on one video doorbell.

モーション検知ゾーンのカスタマイズに対応していますか？

Yes it does. Go to Settings – Alarm Setting – Motion detection – Alarm Area. Use your finger tips to draw one or more customized motion detection zones and save your settings, and the orange zones are motion detection zones.

How does the video doorbell detect the motions? Can motion detection be disabled?

The doorbell camera detects motion through the full-image pixel contrast, it will further undergo an human-shape detection to reduce false alarm rate. You can adjust the motion detection sensitivity,customize detection zone, schedule alarm intervals and disable motion detection accordincly due to various user scenarios.

ドアベルはクラウドストレージに対応していますか？

Your doorbell support MicroSD card storage as well as cloud storage. You can activate the cloud storace service in App, There is 7-day free cloud recording trial service. Please note that cloud storage only support event recording but not full day recording.

Does it work with Google Home or Alexa?

Yes, it works with Google voice assistant as well as Amazon Alexa.