SV3C C23 시큐리티 카메라 사용 설명서

Product Packing List

제품 소개

CAUTION: Please insert the Micro SD Card according to the direction shown in the diagram. Micro SD Card might JAM if inserted incorrectly and device could be damaged.

SD 카드 포트: 로컬 저장소용 마이크로 SD 카드 지원(최대 128GB).

Reset button: Used to restore the camera to factory settings (Press and hold on 5-8s).

Card capacity requirements: 8-128GB.

읽기 및 쓰기 속도 요구 사항: 클래스10 수준.

파일 형식: FAT32

Power port: DC 5V+10%

Power on/off: Press power button for 5 seconds to turn on/off the camera

Status light:

Solid red light on: the camera is turning on or malfunctional

Blinking red light: awaiting WiFi connection (slowly blinking)

connecting the WiFi (quickly blinking)

파란색 표시등 깜박임: 현재 연결 중

Solid blue light on:the camera runs correctly

Reset: Press and hold on for 5 seconds to reset the camera

Charging indictor:

Solid red indicator on: battery is charging

Solid blue indicator on:charging completed

Battery: Built-in rechargeable batteries

앱 설치 및 계정 등록

2.1 Download”SV3C Cloud”APP

Method 1: Download”SV3C Cloud”APP from APPStore (iOs) or Play Store (Android) ;

Method 2: Scan”SV3C Cloud”APP QR code to download it.

TIPS: APP Permission Settings

Tips: Please turn on 2 permissions below when use this APP at the first time.

1.Allow“SV3C Cloud”APP to access mobile cellular data and wireless LAN, or it will be failed to add IP camera.

2.Allow“SV3C CloudAPP to receive pushed message, or the cellphone will not receive alarm push when motion detection or audible alarm is triggered.

2.2 New Registration

How to register

Step 1: Launch the application and click on “Register”. If you have already created an account, click on Login. Enter a valid email address and password and check the privacy policy.

3.1 카메라 전원 켜기

Please long press the power button for 5s to power the camera.

The indicator with red light blinking slowly means the camera is started successfully.

3.2 카메라 연결

Put the camera and smart phone 1 to 3 feet (30 to 100 cm) away from the router to set Wi-Fi.

온난화 팁:

The camera only supports 2.4GHz Wi-Fi, and doesn’t support 5GHz WIFl.

Please ensure that the Wi-Fi signal strength is to be over than 85%; if the camera is far away from the signal source , it won’t be connected successfully for the first time.

4.Add a device

Step 1: Click ‘Add a device’ or ‘+’ and select the type of camera you purchased.

Step 2: Select your Wi-Fi, enter the password and click ‘Next

Note: All WiFi routers support 2.4G Wi-F. When adding a camera, you must select 2.4G wireless Wi-Fi.

If necessary, you can switch to 5G Wi-Fi again on your phone after adding a camera via the app. If you are unsure how to switch to 2.4G Wi-Fi from your router, see the Q&A.

Step3: Read the operation instructions and click Next. Point the QR code displayed onthe smartphone to the device about 15-25cm (5-8in). When you hear the sound of ‘Dong , clickNext Wait about 30 seconds until the connection is complete.

Step 4: All done. You have added the camera successfully to your phone.

Step 5: Begin to monitor your home.

Charge the Camera

It’s recommend to fully charge the battery before mounting the camera outdoors.

Charge the battery with a power adapter.
(not included)

Charge the battery with the Solar Panel

Charging Indicator:

RED LED: Charging

Blue LED: Fully charged

For better rain protection, when charging with a solar panel, please only open the small rubber labeled “POWER” and keep the outside rubber closed well. Please keep the rubber closed always after installation of the Micro SD card.

Camera Installation

a.Install the bracket and Camera

Follow the below chart. Drill the holes according to the positioning sticker provided.
Screw the expansion nut into the holes, then connect the bracket to the expansion nut with the screw to complete the installation.

b. Select a good spot for your camera

Please install the camera in a position where it’s view is not blocked and ensure that it is within the coverage of the Wi-Fi network.

We recommend installing the camera about 8ft height. You can adjust the height/camera angle according to the real time view on your phone.

Solar Panel Installation

Please choose a location for your solar panel that gets the most sunlight throughout the year. The solar panel needs only a few hours of direct sunlight to sufficiently power up your camera daily. The amount of energy that the solar panel can produce is affected by weather conditions, seasonal changes, geographic locations, etc

Important to know

Make sure the solar panel is not blocked. The energy harvesting efficiency drops drastically even when a small portion of the solar panel is blocked.

Please don’t install the solar panel completely horizontally. Otherwise your solar panel might accumulate dust and other debris easily. It’s advised to install the solar panel angularly to receive the most direct sunlight.

Wipe the solar panel regularly to remove dust or debris.

Please charge the batteries in temperature between -20.5°C ~48.5C(-59F~120F).

The solar panel won’t charge the camera at temperatures below -20.5%C

Troubleshooting

Stop Charging the Battery-powered Cameras

If your solar panel can’t charge the camera anymore, try the following solutions:

• Unplug and re-insert the charging cable. Please ensure the connection between the solar panel and camera is stable.
• Make sure that your solar panel points toward the sun and is not shaded by trees,buildings, or other objects.
• Make sure that your camera is not charged at temperatures below-20.5°C~ 48.5C(-59F~120F).

1.Screw the universal joint into the back of the solar panel.Tighten it firmly with the attached nut.

2.Screw the locking screw cap into the base.Make sure that the universal joint is angled upward.

3.Solar pane’s angle can be adjusted up and down up to 90°

Tip:After the installation is complete,please check that all locking mechanisms are tightly secured.

HOW TO POSITION YOUR SOLAR PANEL

1.Find the area that gets the most direct sunlight throughout the day

2.Angle the solar panel at local latitude + 5 degree upward

3.Point it south if in the northern hemisphere and point it northern if in the southern hemisphere.

BASIC PARAMETERS

Cable length:3m
Operating voltage:5V DC

Operating temperature:-20.5°C to 48.5C(-5°F to 120°F)

Description of the main menu screen

PIR Motion Detection Settings

1.Turn on/off motion detection: if you disable motion detection, the camera will not record videos, and you will not receive motion triggered events.

2.Change detection sensitivity: Sensitivity level from 1-10. lt is suggested to set a more high level(6-10) to receive more detailed event at first. If you feel disturbed by the notifications, you could choose to decrease unnecessary notification and reduce false alarms.

3.Click“Alarm Working Mode”:

Here are 3 functions: Recording time-allow you to record a long video(10-30s);Alarm Interval-select trigger frequency of motion detection.

4.Alert Plan: Set a time period to open the motion detection if you need.

How to Store Recordings

1.Stored By Manual

Go to live video, manually record the video by clicking ‘Record’ button to startor end, existing the live view will automatically stop recording.

2.Memory Card

The camera supports micro SD card(NOTINCLUDED), up to 128GB

3.Cloud Storage Plan

With a cloud subscription, you can record and save all video clips to the cloud and view them in your SV3C Cloud APP.

Please Note:

No cancellation or refund is allowed once the cloud service is purchased

Video Playback

1.Video Playback in SD Card

1.Go to the main interface,click “History-Alert” icon, you will see today’s motion detected events. Tap any of these videos to playback.

2.Open the Calendar’to trace back and playback early recorded videos.

2.Video Playback in Cloud

Go to the main interface,click “Cloud-Alert” icon, you will see today’s motion detected events. Tap any of these videos to playback.

Camera Sharing

When you need to view the camera with other family members or friends,you can use this device sharing function. Only the administrator whose account is bound with the camera for the first time can share and set the device. Other members can only view the live or playback of the device.

Note: Please make sure the registered regions of all shared accounts are same with the administrator’s account.

Step 1: Click ‘Device Share’ on setting page

Step 2: Click Scan QR Code?

Step 3:Scan the QR code of the sharedaccount and you will receive theconfirmation notification after success. Thesharing will be completed after you agree.

If you choose enter account, you couldsearch the account you would like to add.

1.Way of Charging

The APP will remind you to charge your camera when the battery is low.

Please use the Micro USB cable to plug into the 5V/1A charging adapter to charge the camera. During charging,the camera’s indicator is red, and when the camera is fully charged, the indicator light will turn into solid blue. It will take about 8 hours to fully charge.

You could use the solar panel to charge the camera.

Note:The accurate battery level can be viewed in ‘Setting-Battery Management’.

Safety Instructions of Battery Usage

The camera is not designed for running 24/7 at full capacity or around-the-clock live streaming. It’s designed to record motion events and to live view remotely only when you need it.

1.The battery is built-in, so do not remove it from the camera

2.Charge the rechargeable battery with a standard and high-quality DC 5V battery charger or solar panel. Do not charge the battery with solar panels from any other brands.

3.Charge the battery when temperatures are between 0°C and 45°C and alwavs use the battery when temperatures are between -20°C and 60°C

4.Keep the USB charging port dry, clean and free of any debris and cover the USB charging port with the rubber plug when the battery is fully charged.

5.Do not charge, use or store the battery near any ignition sources, such as fire or heaters.

6.Do not use the battery if it gives off an odor, generates heat, becomes discolored or deformed, or appears abnormal in any ways. lf the battery is being used or charged, remove the battery from the device or the charger immediately, and stop using it.

7.Always follow the local waste and recycle laws when you get rid of the used battery.

2.About Battery

This camera adopts innovative low-power technology and has different power consumption in different scenarios, giving it a more durable standby capability.

When there is no motion detection, the camera will enter sleep mode with the lowest power consumption. When a motion is detected, the camera will be woken up immediately and start recording video.

Notes

1.If the camera is pointed to a busy street, it will be woken up frequently and detect massive movements, as a result, the battery power will be consumed quickly.

2.The battery consumption and standby time are closely related to the number of detected motions a day.The more detected motions, the faster battery consumption and the shorter battery standby time.

3.The typical estimated life of a Lithium-ion battery is about two to three years or 300 to 500 charge cycles whichever occurs first. One charge cycle is a period of use from fully charged, to fully discharged.

4.The recommended operation environment for the camera is 4°F~140°F(20°C-60°C).For lower temperatures, it may slow down the battery performance.

자주 묻는 질문

1)The device prompts ofine?

• Check whether the equipment is in the power-on state, and observe whether the working light of the equipment is on normally.
• Check whether the Wi-Fi network is in good condition and restart the router.
• If the device is located far away from the router, which results in the inability to obtain a good Wi-Fi signal, it is recommended to move the router to a closer place or add a Wi-Fi amplifier to improve the Wi-Fi performance of the home.
• Delete the camera from your SV3C Cloud account and add it again after retting the device.
• Check whether the device firmware and application program are the latest version.

2)Update router or Wi-Fi password?

Delete the camera from your SV3C Cloud account. After resetting the device, use the new Wi-Fi and password to add it again.

3) Can’t play historical video?

• Check the status of the SD card in “Settings” to ensure that the SD card has been successfully recognized.
• Reinsert the SD card.
• In the application, format the SD card.
• Try another new SD card.

4) Why doesn’t the device identify the SD card ?

• Please insert the Micro SD card before power on;
• It is recommended to use San Disk, Samsung and other brand cards;
• It is recommended to use a standard class 10 TF card;
• Only FAT32 format is supported.
• TF card can’t be identified when the internet environment is not good.

5) Why the battery life of my device is poor?

• Please check whether the number of alarms is too frequent. Because the working time of the device determines the battery life. The more frequent PIR wake-ups, the faster the battery consume due to the longer working time. It is recommended to appropriately lower the motion detection sensitivity of the device and set the alarm interval and alarm time plan. (Note: Outdoor air conditioning units, moving cars and the passing pedestrians will cause frequent alarms. Please adjust the angle of the device to avoid these objects.)
• Incold weather, the battey capaciy will be reduced, which wll afet the endurance of the device.

6) The phone cannot receive the alarm push?

• Turn on all the push permissions of the “SV3C Cloud” application in the system settings of your mobile phone.
• Make sure that the device’s motion detection function is successully turned on.
• Restart the phone, and clear the cache on Android phones.
• Check whether the network is good.

7) How to judge whether the charging is successful?

The device’s charging indicator light is red, which means it is charging. A blue light means that charging is complete. lt will take approximately 10 hours or more to fully charge.

8) What should do if the charge fails?

• Determine whether the power adapter is good, try another one.
• Determine whether the Type-C charging cable is good, try another one.
• The charging indicator may be defective, please check the charging condition in the phone APP.
• Determine whether the charging port of the device is not in good contact with the Type-C charging cable.
• The device has a low temperature charging protection module, please don’t charge the device at low temperatures.

Step 1:

Find the router website on your computer/laptop. Or if you have connected your Wi-Fi on your phone,click your Wi-Fi for router information.

Step 2:

Sign in your router account, Rename your Wi-Fi with 2.4G and 5G respectively for easy distinction.(Do not use 5G preferred,2.4Ghz & 5Ghz will mix together if you open it, You don’t know whether you have connected to 2.4Ghz Wi-Fi or 5Ghz Wi-Fi)

Step 3:
Choose 2.4G Wi-Fi and then connect it on your phone.Then begin to connect your camera.

Notification of Compliance

FCC Compliance Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to thefollowing two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in residential installation.

This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception. which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

● Reorient or relocate the receiving antenna.
● Increase the separation between the equipment and receiver.
● Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
● Consult the dealer or an experienced radio/TV technician for help.
FCC RF warning statement:
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction,