包装盒内有什么
请参考下面的清单，了解所有组件。
说明
| 电源 | AC 12~24V |
| 状态指示灯 | 红灯亮起：摄像机正在打开或出现故障 Blinking red light: awaiting WiFi connection (slowly blinking) 连接 WiFi（快速闪烁） 蓝灯闪烁：正在连接 蓝灯亮：摄像机运行正常 |
| Doorbell button | Press the button to activate the doorbell |
| 麦克风 | Captures sound for your video |
| SD 卡插槽 | 支持本地 SD 卡存储（最大 128G） |
| 重置 | Press and hold on for 5 seconds with pin to reset the doorbell |
Mechanical Chime Installation
First, turn off the power breaker at your fuse box for your existing doorbell and mechanical chime. Ring your doorbell again to confirm it is now off.
Find your mechanical chime, which is a rectangular box that produces the sound when your doorbell is pressed. It may(or may not)be mounted immediately inside your FRONT door. And remove the cover.
Slightly unscrew both screw terminals and one hook from the Chime Kit under each screw(It does not matter which color wire from the Chime Kit connects to which screw).
Locate the Chime Kit included in the smart doorbell’s packaging and the terminals on the inside of the chime. Connect one of the Chime Kit’s prongs to the transformer terminal(usually labeled TRANS, T, AC, or 0).
Connect the other prong to the chime’s front terminal (usually labeled FRONT, F1, or C1). Either prong on the Chime Kit can be connected to either of the terminals on the chime.
Using the included double-sided tape, affix the Chime Kit to your chime wherever there is space and replace the cover. Be careful not to interfere with any of the chime’s moving parts.
Ensure that the Chime Kit and wires DO NOT interfere with the mechanical parts of the chime. Mount on the outside of the chime if there is not enough room to mount inside. And replace your chime’s cover.
安装
Mode 1 Doorbell General Installation
Mode 2 Angle Wall Mount + Bracket + Doorbell Installation
Turn the doorbell power back on at the fuse box. The light on the doorbell button should turn on and, after a few minutes, become red slowly.
连接
下载
CloudEdge 适用于 iOS 和 Android 操作系统。请在 App Store 或 Google Play 中搜索 "CloudEdge"，或扫描二维码下载应用程序。
Set up router
This product only supports 2.4GHz frequency band routers and does not support 5GHz frequency band routers; please set the relevant parameters of the router before WiFi configuration; WiFi passwords do not include special characters such as ~!@#$%^&*(). When the device is configured to use WiFi, the mobile phone and device are as close to the router as possible, which can speed up the configuration of the device.
注册程序
Step 1 Open the Cloudedge App, click “SlGN UP,” input a valid email address, and click “NEXT.”
Step 2: Input the verification code and create a password and Nickname that is not less than six digits. Then login.
Note: Make sure your router, camera, and mobile phone are nearby.
QR Code Configuration
Few notice before adding the device
1. This camera only supports 2.4GHZ wifi routers; please make sure you are using a 2.4GHZ wifi router.
2. Please follow the instructions and make sure the password is inputted correctly.
3. One camera can only be added to one APP account; if the camera has been added to another account already, then it can’t be added to any other account again.
Process
Step 1 Open the CloudEdge App, click ‘+,’ and select the type of device to add.
Step 2 Please confirm the red LED light blinks, select ‘The device has flashed red slowly, or you hear a tone,’ and click ‘Next.’ Then, input the wireless password and click ‘Next.’
Step 3 The device is scanning the QR code at a distance of 15~25cm (you can click the ‘operation’ to view the scanning mode). After the device scans successfully, click ‘Hear tone.’
Step 4 The device is successfully connected to the network. After the configuration is completed, the app automatically adds the successfully scanned device and returns it to the device list. The configuration is completed.
Step 5 Click the play button to complete the preview. (Remind: long press the image to be previewed to remove the device, and add the device again to reset the device)
功能
Full-duplex audio
When the visitor pushes the doorbell button, you will get a call. You can see and hear the visitor in your App from the doorbell if you answer.
Motion detection
Motion sensors will notify you when movement is detected.
Shared device
The doorbell device can be shared with friends, and friends can also preview online. There is no limit to the number of sharing devices, but only six accounts are supported for online preview at the same time.
记录
使用 SD 卡或打开云存储服务，记录每一刻。
日与夜
强大的夜视功能意味着即使在漆黑一片的环境中也不会受到干扰。
常见问题
Q: In the network process, the process bar is always not 100%; add failure?
A: This camera only supports a 2.4GHz WiFi router; please make sure you are using a 2.4GHz WiFi router. And confirm the WiFi password again.
Q: Are repeated addition failures?
A: After adding a failure, it is recommended to restart the device or power off and then try to add again.
问：无法正常预览设备？
答：检查网络是否正常。可以将摄像头靠近路由器，如果不正常，建议重置设备并重新添加。
问：如何将摄像机网络切到另一个路由器上？
答：首先，在 App 上移除并重置设备，然后通过 App 重新配置设备。
Q: Why can’t I get the notifications with my cell phone App?
A: Please confirm that the App has been running on the phone and the relevant reminder function has been opened; Message notification and authority confirmation in the mobile phone system have been opened.
问：为什么设备无法识别 SD 卡？
A: It is recommended to plug in an SD card after a power cut. Confirm whether the SD card is normally available and the format is FAT32. And the TF card can’t be identified when the internet environment is not good.